Belshaw Brothers TG 50 manual Pump Motor will not RUN

THE PUMP MOTOR WILL NOT RUN

Possible Causes	What To Do
The connection of the power cord to the power	Make sure the power cord is fully plugged in to a
source is faulty.	proper power source.
The circuit breaker has been tripped.	1.	Disconnect from power.
	2.	Open electrical enclosure.
	3.	Reset circuit breaker.
	4.	Close electrical enclosure.
THE FILL HOSE IS LEAKING
Possible Causes	What To Do
Fill hose is leaking at the connection.	Hose bracket needs adjusting or tightening.
Fill hose is leaking near the pump.	Check for missing or damaged o-ring.

Belshaw Bros., Inc. • 1750 22nd Ave. S. • Seattle, WA 98144 • Phone 206-322-5474 • Fax 206-322-5425

Thermoglaze 50 MN-1716EN 25