9.Remove the conveyor assembly through the outfeed end of the oven.
10.Turn the end cover latches counterclockwise.
11. Remove the end covers.
12.Lift up on the outfeed upper finger housing and slide it to the rear of the oven disengaging it from the mounting bracket.
13. Lower the end of the finger assembly.
14.Pull the finger assembly off the duct on the back of the oven and remove it.
Belshaw Bros., Inc. • 1750 22nd Ave. S. • Seattle, WA 98144 • Phone
10 |
| Thermoglaze 50 |