Open Kettle Fryer Parameter Settings
Tables 1, 2 and 3 below list of the temperature controller default settings and the Belshaw Factory settings. When installing a new controller 4 of the default setting must be changed to the Belshaw Factory settings.
•Push and hold the scroll key 
for 3 seconds, this will take you to the “SEt” menu.
•Push the scroll key 
once to access the “LocK” parameter.
•Push the Up 
or down 
arrow keys to change “LocK” to “nonE”.
•Push the scroll key 
to page through the settings and the Up 
or down 
arrow keys to
change the settings listed in the Belshaw “Factory” column. (see tables 1, 2 and 3) When finished setting parameters.
•Continue pushing the scroll key 
until you are back to “LocK”.
•Push the Up 
or down 
arrow keys to set “LocK” to “uSEr”.
•Push the reset key 
to return normal operation.
Default Settings:
In the event that parameters have been modified without recording the modifications, change each parameter to match those listed in Tables 1, 2 and 3 listed below (controller parameter default settings). Then adjust SP1H, PB, OUT2 and the LocK parameters as listed in Belshaw “Factory” below. Then set SP1 to 375ºF.
Belshaw Bros., Inc. • 1750 22nd Ave. S. • Seattle, WA 98144 • Phone
718LCG, 724CG, and 734CG Gas Fryers | 13 |