WARNING
Do not allow the cleaning solution to
overflow the containers. Cleaning solution will get on the floor, and if the solution is not cool enough, you may be burned.
8.When the draining is complete, close the drain valve.
9.Carefully carry the container(s) to the sink and slowly pour the solution into the sink.
WARNING
Thoroughly clean and dry the floor if
cleaning solution is spilled. Liquid on the floor can cause serious injury or loss of life.
Rinsing
1.Pour clean water into the kettle, up to the normal level of the shortening. If the cleaner you have used requires that you add a neutralizer, do so now.
CAUTION
To avoid severe damage to the kettle, never turn on the heat unless the heat tubes are completely covered by liquid.
2.Connect the machine to the power source. Move the on/off switch to ON. Set the temperature controls at 200°F/93°C. Leave the water at this temperature for
3.Move the on/off switch to OFF and disconnect the machine from the power source. Allow the water to cool to 100°F/38°C.
4.Place a large metal container under the drain valve.
WARNING
Do not use plastic containers. If the water is not cool enough, the containers will melt; possibly causing you to be burned, and causing cleaning solution to get on the floor.
5.Open the drain valve and allow the water to drain into the container.
6.Watch the container to make sure the water does not overflow the container. If the container becomes full, close the drain valve, put another large metal container under the drain valve, and open the drain valve again.
WARNING
Do not allow the water to overflow the
containers. Water will get on the floor, and if the water is not cool enough, you may be burned.
7.When the draining is complete, close the drain valve.
8.Carefully carry the container(s) to the sink and slowly pour the water into the sink.
WARNING
Thoroughly clean and dry the floor if water
is spilled. Water on the floor can cause
serious injury or loss of life.
9.Dry the kettle and burner tubes thoroughly.
WARNING
Dry the fryer thoroughly. Moisture causes hot shortening to spatter, which may cause serious injury.
Belshaw Bros., Inc. • 1750 22nd Ave. S. • Seattle, WA 98144 • Phone
10 |
| 718LCG, 724CG, and 734CG Gas Fryers |