Carrier 30XW325-400 manual Capacity ratings

Capacity ratings

	CAPACITY		INPUT	EVAPORATOR		EVAPORATOR		CONDENSER		CONDENSER		FULL LOAD
30XW				FLOW		PRESSURE DROP		FLOW		PRESSURE DROP			IPLV
UNIT SIZE	Tons	Output	POWER	gpm	L/s	Ft of	kPa	gpm	L/s	Ft of	kPa	EFFICIENCY	(kW/Ton)
		(kW)	(kW)			Water				Water		(kW/Ton)
325	322	1132.5	204.8	773	48.8	15.6	46.5	967	61.0	10.9	32.5	0.636	0.468
350	343	1206.3	215.7	824	52.0	17.5	52.2	1029	64.9	12.3	36.7	0.629	0.471
400	385	1354.0	242.8	924	58.3	21.5	64.1	1155	72.9	15.2	45.3	0.631	0.474

LEGEND

AHRI — Air Conditioning, Heating and Refrigeration Institute

IPLV — Integrated Part Load Value

NOTES:

1.Certified in accordance with AHRI Standard 550/590 at standard rating conditions.

2.Standard rating conditions are as follows:

Evaporator Conditions:

Leaving Water Temperature: 44 F (6.7 C)

Flow:2.4 gpm per ton (0.043 L/s per kW) Condenser Conditions:

Entering Water Temperature:85 F (29.4 C)

Flow: 3.0 gpm per ton (0.054 L/s per kW)

Fouling Factor (Evaporator):

0.00010 hr x sq ft x F per Btuh (0.000018 m2 x K per W) Fouling Factor (Condenser):

0.00025 hr x sq ft x F per Btuh (0.000044 m2 x K per W)

3.IPLV is a single number part-load efficiency value calculated from the system full-load efficiency values and corrected for a typical building air-conditioning application.

4.Contact Carrier for custom ratings.

5.Data shown for standard chiller with 2 pass, nozzle-in-head (NIH) waterboxes.

6