CDA RC9321 manual Enamelled parts, Changing the oven light

Page 23

Enamelled parts

All the enamelled parts must be cleaned with a sponge and soapy water only or other non-abrasive products.

Dry preferably with a microfibre or soft cloth.

Stainless steel, aluminium, painted parts and silk- screen printed surfaces

Clean using an appropriate product. Always dry thoroughly.

Stainless steel surfaces: can be cleaned with an appropriate stainless steel cleaner.

IMPORTANT: these parts must be cleaned very carefully to avoid scratching and abra- sion. You are advised to use a soft cloth and neutral soap.

CAUTION: Do not use abrasive substances or non-neutral detergents as these will irreparably damage the surface.

Changing the oven light

1.Disconnect the electrical power supply (for example, by switching off the main power switch).

2.Unscrew the light cover

3.Fit a new bulb.

4.Refit the cover.

Note:

Use only bulbs designed to resist up to 300°C with the following characteristics: 230 V, type E14 and same power (check watt power as stamped in the bulb itself) of the replaced bulb.

23

Image 23

Contents RC9321 Twin Cavity Gas Cooker CDA Contents Assembling the backguard IntroductionGas burners Features and technical dataMinute counter Control panelLighting of the hob burners How to use the hob burnersHob burners Burners Pan diameter Choice of burnerCorrect use of triple-ring burner Oven thermostat How to use the gas oven left ovenGeneral features Oven burnerOven cooking Lighting the oven gas burnerLighting the grill gas burner How to use the gas grill left ovenOven light Use of the grillHow to use the gas oven right oven Lighting the oven gas burner How to use the gas grill right oven Important Warning Use of the rotisserie Rotisserie right ovenOven cooking temperatures Do’s and do not’s Do’s and do not’sOven door guard For your safetyImportant notes Gas taps Care and maintenanceCleaning the hob Flexible tubeChanging the oven light Enamelled partsTriple ring burner BurnersStorage compartment Removal of the inner glass door panelAssembling and remov- ing the side racks Inside of ovenRemoving the oven door Door assemblyLocation For the InstallerAir Vent Fitting the adjustable feet Levelling the cooker Moving the cookerStability bracket Provision for ventilation Important Note Gas installationGas connection Installation to Natural GasLeft gas Right gas Inlet pipe 200 mm 700 mm Conversion to Natural Gas or to LPG Injectors replacement of top burnersAdjusting of the minimum of the top burners Table for the choice of the injectors Left Oven Oven burner and grill burner replacement of injectorsRegulation of air supply to oven and grill burners Right Oven Regulation of air supply to oven and grill burners Regulating of the oven minimum Left and Right OvensLubrication of the gas taps For your safety please read the following information Electrical installationFeeder cable section type H05RRF Electrical feeder cable connectionAppliance servicing Limit of Cover GuaranteePage Page RC 9321 .. cookers