CDA RC9321 manual Electrical installation, For your safety please read the following information

Page 46

Electrical installation

For your safety please read the following information:

This appliance must be installed by a qualified technician according with the current local regulations and in compliance with the manufacturer instructions.

This appliance is supplied with a moulded 13 amp three pin mains plug with a 3 amp fuse fitted. Should the fuse require replacement, it must be replaced with a fuse rated at 3 amp and approved by ASTA or BSI to BS 1362.

The plug contains a removable fuse cover that must be refitted when the fuse is replaced. In the event of the fuse cover being lost or damaged, the plug must not be used until a replacement cover has been obtained. Replacement fuse covers can be purchased from your nearest electrical dealer and must be the sarne colour as the orig- inal.

IF THE MOULDED MAINS PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME OR IS REMOVED FOR ANY OTHER REASON, THEN THE FUSE SHOULD BE REMOVED AND THE CUT OFF PLUG DISPOSED OF SAFELY TO PREVENT THE HAZARD OF ELECTRIC SHOCK.

THERE IS A DANGER OF ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMP SOCKET OUTLET.

If a replacement plug is to be fitted, please observe the wiring code shown below.

Warning! This appliance must be earthed

A properly earthed three pin plug (fused at 3 amps, to BS 1362 ASTA approved) must be used. As the colours of the wires in the mains lead of this appliance may not corre- spond with the coloured markings identifying the terminals in your plug, proceed as follows.

The wire which is coloured GREEN & YELLOW must be connected to the

terminal in the plug which is marked Green & Yellow with letter "E" or by the Earth symbol Earth

or coloured GREEN & YELLOW.

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter "N" or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter "L" or

coloured RED.

Blue Neutral

 

3 amp fuse

Brown Live

Fig. 59

46

Image 46
Contents RC9321 Twin Cavity Gas Cooker CDA Contents Introduction Assembling the backguardFeatures and technical data Gas burnersControl panel Minute counterHob burners How to use the hob burnersLighting of the hob burners Choice of burner Burners Pan diameterCorrect use of triple-ring burner Oven burner How to use the gas oven left ovenGeneral features Oven thermostatLighting the oven gas burner Oven cookingHow to use the gas grill left oven Lighting the grill gas burnerUse of the grill Oven lightHow to use the gas oven right oven Lighting the oven gas burner How to use the gas grill right oven Important Warning Rotisserie right oven Use of the rotisserieOven cooking temperatures Do’s and do not’s Do’s and do not’sImportant notes For your safetyOven door guard Flexible tube Care and maintenanceCleaning the hob Gas tapsEnamelled parts Changing the oven lightBurners Triple ring burnerRemoval of the inner glass door panel Storage compartmentInside of oven Assembling and remov- ing the side racksDoor assembly Removing the oven doorFor the Installer LocationAir Vent Fitting the adjustable feet Moving the cooker Levelling the cookerStability bracket Provision for ventilation Gas installation Important NoteInstallation to Natural Gas Gas connectionLeft gas Right gas Inlet pipe 200 mm 700 mm Adjusting of the minimum of the top burners Injectors replacement of top burnersConversion to Natural Gas or to LPG Table for the choice of the injectors Oven burner and grill burner replacement of injectors Left OvenRegulation of air supply to oven and grill burners Right Oven Regulation of air supply to oven and grill burners Left and Right Ovens Regulating of the oven minimumLubrication of the gas taps Electrical installation For your safety please read the following informationElectrical feeder cable connection Feeder cable section type H05RRFAppliance servicing Guarantee Limit of CoverPage Page RC 9321 .. cookers