English
Door Reversal
1. | Upper Hinge Hole Cover 1 | 11. | Door Seal |
2. | Upper Hinge Hole Cover 2 | 12. | Hole Cover |
3. | Upper Hinge Screw Cover | 13. | Upper Hinge Axes Bushing |
4. | Upper Hinge Cover Screw | 14. | Door Bushing |
5. | Hinge Cover | 15. | Axis Bushing Screw |
6. | Upper Hinge Screw | 16. | Lower Hinge Axes Bushing |
7. | Upper Hinge | 17. | Handle |
8. | Lower Hinge | 18. | Spring Gasket |
9. | Lower Hinge Screw | 19. | Flat Gasket |
10. | Lower Hinge Cover | 20. | Handle Screw |
1.Remove the screw cover from the upper hinge cover. Use a Phillips
head screwdriver to remove the screw that holds the upper hinge cover in place. Remove the upper hinge cover.
Loosen and remove the screws that hold the upper hinge in place.
Note: Make sure you hold door to prevent it from falling or being damaged.
Lift and set aside for now.
Remove both of the upper hinge hole covers (left side) and set aside.
| 3 |
|
| 4 |
|
2 | 5 | 1 |
6 | ||
1 | 7 |
|
2
9