Henny Penny HMI-103, HMI-105 manual Installation, Introduction, Unpacking

Model HMI-103/105

	SECTION 2. INSTALLATION
2-1. INTRODUCTION	This section provides the installation instructions for the Henny
	Penny Island Warmer.

Installation of this unit should be performed only by a qualified service technician.

		Do not puncture the skin of the unit with drills or
		screws as component damage or electrical shock
		could result.
2-2. UNPACKING	The Henny Penny Island Warmer is tested, inspected and
	expertly packed to insure arrival at its destination in the best
	possible condition. The unit has been bolted to a wooden skid.
	All items have been packed and taped inside of the unit. The
	warmer is then packed inside a triple wall corrugated carton
	with sufficient padding to withstand normal shipping treatment.
	Any shipping damages should be noted in presence of
	delivery agent and signed prior to his or her departure.
	To remove the unit from the carton, you should:
	1.	Carefully cut banding straps.
	2.	Open flaps of carton and remove packing.
	3.	Lift carton from unit.
	4.	Remove four bolts mounting the warmer to the skid.
	5.	If installing the unit to a base, use the bolts provided to
		mount the unit to the base.
	6.	Unpack doors and pan supports and install.
	7.	The unit is now ready for location and set-up.

203 2-1