Cabletron Systems SEH100TX-22 manual Rackmount Installation, Screws Strain-Relief Bracket

Rackmount Installation

4.3RACKMOUNT INSTALLATION

To install the SEH in a 19-inch rack, Cabletron Systems provides an accessory kit with the SEH that includes rack mounting brackets, mounting screws, and a strain-relief bracket for cable management.

Rack mounting the SEH involves the following:

•Attaching the strain-relief bracket

•Rack mounting the SEH

•Stacking the SEH when applicable

Attaching the Strain-Relief Bracket

Attach the strain-relief bracket to the front of the SEH as follows:

1.Locate the strain-relief bracket and four 8-32 x 3/8-inch pan-head screws from the rackmount kit.

Do NOT attempt to attach the strain-relief bracket with screws other than the 8-32 x 3/8-inch screws included with the SEH. Use of longer screws may damage the unit or cause electrical shock.

2. Attach the strain-relief bracket to the bottom of the SEH (Figure 4-2).

Screws (4)

Strain-Relief Bracket

1 EPIM

1X

2X

3X

4X

5X

6X

7X

8X

9X

10X

11X

1

1

2

3

4

5

6

7 8 9 10 11

CLN

E

LNK

RCV

MGMT

PWR

12X

13X

14X

15X

16X

17X

18X

19X

20X

21X

22X

2

12 13 14 15 16 17 18 19 20 21 22

E

LNK

RCV

		22-100TXSEH
LANVIEW®	WITH	HUB TX-100BASE HubSTACK
2 EPIM

1510_12

Figure 4-2 Attaching the Strain-Relief Bracket

SEH100TX User’s Guide 4-3