Cabletron Systems SEH100TX-22 manual Installing an Epim

Installing an EPIM

To install an EPIM-100TX, EPIM-100FX, or EPIM-100FMB, proceed as follows:

When removing an EPIM, pull the module straight out to

!prevent damage to the connector.

CAUTION

1.Remove the coverplate or the existing EPIM (whichever applies).

2.Slide the new EPIM into place, making sure that the connectors on the rear of the EPIM align correctly and firmly with the connector inside the SEH. Refer to Figure 4-6.

3.Tighten the mounting screw.

EPIM 2

LNK

EPIM-100TX

EPIM 1

1510_09

Figure 4-6 Installing an EPIM

LNK

EPIM-100TX

SEH100TX User’s Guide 4-9