Henny Penny FM07-020-F manual Fryer Power UP Mode Mode Selection from Filter Mode

Page 14

2-2. SWITCHES AND INDICATORS (Continued)

2-3. FRYER POWER UP MODE

2-4. MODE SELECTION FROM FILTER MODE

DROP Indicator -The display will read “DROP” when the shortening has reached the setpoint temperature. (+ 4° to -2°)

Temperature Switch -This switch allows the operator to read the temperature of the shortening while in a cook cycle. The display range is from 255° to 390° F.

In power up, the mode is selected depending on the temperature of the oil. Power Switch in the “POWER” position.

1.If pot temperature is below the melt temperature of 185° the fryer will enter the melt mode. Display will read’ “LO”.

2.If the pot temperature is 185° F or higher the control will enter the stand-by mode and regulate to 250° F. Display will read “COOL”.

3.When the operator presses the EXIT COOL switch the control will return to the last cycle selected and regulate to that cycle’s programmed temperature.

To avoid electrical shock, this appliance msut be equipped with an external circuit breaker which will disconnect all ungrounded (unearthed) conductors. The main power switch on this appliance does not disconnect all line conductors.

When the display reads “FILR” after a cooking cycle, it is time to filter. Move the power switch to the OFF position and filter as usual. When the display reads “FILL” move the power switch to the pump position and pump the shortening back into the frypot. The control will remain “locked out” until the shortening has been filtered and the operator depresses the EXIT FILL switch. The control will then enter the stand-by mode.

To avoid personal injuries or property damage be sure shortening has been pumped back into the frypot before depressing the EXIT FILL switch. Unit will enter the heat mode.

2-2

304

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operator Manual Page Limited Warranty for Henny Penny Equipment Table of Contents Safety Assistance IntroductionIntroduction REMOVALplaceNINE-PIN Connector Wiring Temperature Probe Installation Control Panel Installation Slot Cover304 304 304 304 Introduction Switches and Indicators OperationFryer Power UP Mode Mode Selection from Filter Mode Cooking Operation Filtering Shortening Filtering ShorteningPage Programming Basic Programming Sequence Cook Cycle ProgrammingProgramming Error Codes Special Programming ModesCook Cycle ONE Step KFC Parameters Test Procedure Test Procedure Special Functions805 805 805 805 805 807 805 807 807 807 807 807 807 807 SN AN0703021 & Above SN AN0703021 & Above Spare Parts List GAS DescriptionSpare Parts List Electric

FM07-020-F specifications

The Henny Penny FM07-020-F is a state-of-the-art commercial fryer designed for high-volume cooking environments, providing efficiency and reliability for restaurants, food trucks, and catering services. With an impressive range of features, it caters to both convenience and quality in food preparation.

At the forefront of its design, the FM07-020-F includes a robust oil delivery system, which ensures consistent and even heating across the frying surface. This feature helps to minimize oil temperature fluctuations, resulting in perfectly cooked foods every time. The fryer is built with a large capacity, allowing users to cook substantial quantities of food, making it ideal for busy kitchens.

One of the standout characteristics of the FM07-020-F is its advanced filtration system. This technology extends the life of the frying oil, reducing operational costs and promoting food consistency. With periodic filtration, the fryer automatically removes food particles from the oil, maintaining its cleanliness and enhancing the flavor of the fried items.

The FM07-020-F is also equipped with intuitive digital controls, allowing operators to easily set and monitor frying times and temperatures. This enhances user experience by providing straightforward navigation, which is especially beneficial during peak service times. The digital interface displays real-time cooking information, ensuring products are cooked to perfection.

Safety and durability are paramount in the design of the Henny Penny FM07-020-F. It features a cool-to-the-touch exterior, minimizing the risk of burns, while the stainless steel construction ensures longevity and ease of cleaning. Its efficient design also includes a safety shut-off feature, which prevents overheating and potential hazards.

In summary, the Henny Penny FM07-020-F fryer sets a high standard in commercial frying solutions. Its combination of advanced technologies, including a reliable oil delivery system, intelligent filtration, and user-friendly controls, makes it an invaluable asset for any culinary operation seeking to enhance productivity while delivering exceptional fried food quality. With safety and efficiency at its core, it remains an outstanding choice for chefs and food service professionals alike.
Top Page Image Contents