Henny Penny FM07-020-F manual NINE-PIN Connector Wiring Temperature Probe Installation

Page 7

1-5. NINE-PIN CONNECTOR WIRING

1-6. TEMPERATURE PROBE INSTALLATION

A.Remove the above wires from their existing position. These wires will be connected to the nine-pin connector provided.

B.Locate wires number 12, 8, and 11 at the fan motor. Remove the connector securing these wires. Wire number 11 can be discarded at this time. Wire number 12 will be connected to the nine-pin connector as noted on the wiring diagram. Wire number 8 from the fan motor will be joined with wire number 15 before it is connected to the nine-pin connector. Join these two wires using the twist-on wire connector provided.

C.Note the position of the wires on the nine-pin connector. Reference wiring diagram Figure 2. The wires on the connector will have corresponding numbers to those within the control panel.

D.Using the twist-on wire connectors provided, splice the corresponding wires together.

E.Wiring of the nine-pin connector is completed.

“Do not install the control panel at this time.”

A.Drain the shortening from the cook pot to a level below the position of the thermostat pot fitting.

B.Remove the thermostat capillary tube from the cook pot

as per section 5-11 of standard Henny Penny Service Manual.

C. Install the reducer fitting, Henny Penny part number FP01-024 into the pot wall fitting. Use pipe sealant to seal the pipe threads.

D. Install the compression fitting, part number 30094, Figure

3 into the reducer. Use pipe sealant to seal the pipe threads.

E.Install the new probe by inserting the probe into the compression fitting until the probe extends one-half (1/2) inch into the cook pot. Tighten the nut on the compression fitting a half a turn past the point where the fitting first becomes tight onto the probe.

Excess force will damage the probe.

F. Installation of the temperature probe is complete.

304

1-3

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operator Manual Page Limited Warranty for Henny Penny Equipment Table of Contents Introduction Safety AssistanceREMOVALplace IntroductionNINE-PIN Connector Wiring Temperature Probe Installation Slot Cover Control Panel Installation304 304 304 304 Operation Introduction Switches and IndicatorsFryer Power UP Mode Mode Selection from Filter Mode Cooking Operation Filtering Shortening Shortening FilteringPage Basic Programming Sequence Cook Cycle Programming ProgrammingCook Cycle Error Codes Special Programming ModesProgramming ONE Step KFC Parameters Test Procedure Special Functions Test Procedure805 805 805 805 805 807 805 807 807 807 807 807 807 807 SN AN0703021 & Above SN AN0703021 & Above Description Spare Parts List GASSpare Parts List Electric

FM07-020-F specifications

The Henny Penny FM07-020-F is a state-of-the-art commercial fryer designed for high-volume cooking environments, providing efficiency and reliability for restaurants, food trucks, and catering services. With an impressive range of features, it caters to both convenience and quality in food preparation.

At the forefront of its design, the FM07-020-F includes a robust oil delivery system, which ensures consistent and even heating across the frying surface. This feature helps to minimize oil temperature fluctuations, resulting in perfectly cooked foods every time. The fryer is built with a large capacity, allowing users to cook substantial quantities of food, making it ideal for busy kitchens.

One of the standout characteristics of the FM07-020-F is its advanced filtration system. This technology extends the life of the frying oil, reducing operational costs and promoting food consistency. With periodic filtration, the fryer automatically removes food particles from the oil, maintaining its cleanliness and enhancing the flavor of the fried items.

The FM07-020-F is also equipped with intuitive digital controls, allowing operators to easily set and monitor frying times and temperatures. This enhances user experience by providing straightforward navigation, which is especially beneficial during peak service times. The digital interface displays real-time cooking information, ensuring products are cooked to perfection.

Safety and durability are paramount in the design of the Henny Penny FM07-020-F. It features a cool-to-the-touch exterior, minimizing the risk of burns, while the stainless steel construction ensures longevity and ease of cleaning. Its efficient design also includes a safety shut-off feature, which prevents overheating and potential hazards.

In summary, the Henny Penny FM07-020-F fryer sets a high standard in commercial frying solutions. Its combination of advanced technologies, including a reliable oil delivery system, intelligent filtration, and user-friendly controls, makes it an invaluable asset for any culinary operation seeking to enhance productivity while delivering exceptional fried food quality. With safety and efficiency at its core, it remains an outstanding choice for chefs and food service professionals alike.
Top Page Image Contents