Henny Penny FM07-020-F manual Limited Warranty for Henny Penny Equipment

Page 3

LIMITED WARRANTY FOR HENNY PENNY EQUIPMENT

Subject to the following conditions, Henny Penny Corporation makes the following limited warranties to the original purchaser only for Henny Penny appliances and replacement parts:

NEW EQUIPMENT: Any part of a new appliance, except baskets, lamps, and fuses, which proves to be defective in material or workmanship within two (2) years from date of original installation, will be repaired or replaced without charge F.O.B. factory, Eaton, Ohio, or F.O.B. authorized distributor. Baskets will be repaired or replaced for ninety (90) days from date of original installation. Lamps and fuses are not covered under this Limited Warranty. To validate this warranty, the registration card for the appliance must be mailed to Henny Penny within ten (10) days after installation.

FILTER SYSTEM: Failure of any parts within a fryer filter system caused by the use of the non-OEM filters or other unapproved filters is not covered under this Limited Warranty.

REPLACEMENT PARTS: Any appliance replacement part, except lamps and fuses, which proves to be defective in material or workmanship within ninety (90) days from date of original installation will be repaired or replaced without charge F.O.B. factory, Eaton, Ohio, or F.O.B. authorized distributor.

The warranty for new equipment covers the repair or replacement of the defective part and includes labor charges and maximum mileage charges of 200 miles round trip for a period of one (1) year from the date of original installation.

The warranty for replacement parts covers only the repair or replacement of the defective part and does not include any labor charges for the removal and installation of any parts, travel, or other expenses incidental to the repair or replacement of a part.

EXTENDED FRYPOT WARRANTY: Henny Penny will replace any frypot that fails due to manufacturing or workmanship issues for a period of up to seven (7) years from date of manufacture. This warranty shall not cover any frypot that fails due to any misuse or abuse, such as heating of the frypot without shortening.

0 TO 3 YEARS: During this time, any frypot that fails due to manufacturing or workmanship issues will be replaced at no charge for parts, labor, or freight. Henny Penny will either install a new frypot at no cost or provide a new or reconditioned replacement fryer at no cost.

3 TO 7 YEARS: During this time, any frypot that fails due to manufacturing or workmanship issues will be replaced at no charge for the frypot only. Any freight charges and labor costs to install the new frypot as well as the cost of any other parts replaced, such as insulation, thermal sensors, high limits, fittings, and hardware, will be the responsibility of the owner.

Any claim must be presented to either Henny Penny or the distributor from whom the appliance was purchased. No allowance will be granted for repairs made by anyone else without Henny Penny’s written consent. If damage occurs during shipping, notify the sender at once so that a claim may be filed.

THEABOVE LIMITED WARRANTYSETS FORTH THE SOLE REMEDYAGAINST HENNYPENNY FORANYBREACH OF WARRANTY OR OTHER TERM. BUYERAGREES THAT NO OTHER REMEDY (INCLUDING CLAIMS FORANY INCI- DENTALOR CONSEQUENTIALDAMAGES) SHALLBEAVAILABLE.

The above limited warranty does not apply (a) to damage resulting from accident, alteration, misuse, or abuse; (b) if the equipment’s serial number is removed or defaced; or (c) for lamps and fuses. THE ABOVE LIMITED WARRANTY IS EX-

PRESSLY IN LIEU OFALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITYAND FIT- NESS,ANDALL OTHER WARRANTIESARE EXCLUDED. HENNYPENNY NEITHERASSUMES NORAUTHORIZESANY PERSON TOASSUME FOR ITANYOTHER OBLIGATION OR LIABILITY.

Revised 01/01/07

FM07-020-F

Revised 08-31-07

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Operator Manual Page Limited Warranty for Henny Penny Equipment Table of Contents Introduction Safety AssistanceREMOVALplace IntroductionNINE-PIN Connector Wiring Temperature Probe Installation Slot Cover Control Panel Installation304 304 304 304 Operation Introduction Switches and IndicatorsFryer Power UP Mode Mode Selection from Filter Mode Cooking Operation Filtering Shortening Shortening FilteringPage Basic Programming Sequence Cook Cycle Programming ProgrammingError Codes Special Programming Modes Cook CycleProgramming ONE Step KFC Parameters Test Procedure Special Functions Test Procedure805 805 805 805 805 807 805 807 807 807 807 807 807 807 SN AN0703021 & Above SN AN0703021 & Above Description Spare Parts List GASSpare Parts List Electric

FM07-020-F specifications

The Henny Penny FM07-020-F is a state-of-the-art commercial fryer designed for high-volume cooking environments, providing efficiency and reliability for restaurants, food trucks, and catering services. With an impressive range of features, it caters to both convenience and quality in food preparation.

At the forefront of its design, the FM07-020-F includes a robust oil delivery system, which ensures consistent and even heating across the frying surface. This feature helps to minimize oil temperature fluctuations, resulting in perfectly cooked foods every time. The fryer is built with a large capacity, allowing users to cook substantial quantities of food, making it ideal for busy kitchens.

One of the standout characteristics of the FM07-020-F is its advanced filtration system. This technology extends the life of the frying oil, reducing operational costs and promoting food consistency. With periodic filtration, the fryer automatically removes food particles from the oil, maintaining its cleanliness and enhancing the flavor of the fried items.

The FM07-020-F is also equipped with intuitive digital controls, allowing operators to easily set and monitor frying times and temperatures. This enhances user experience by providing straightforward navigation, which is especially beneficial during peak service times. The digital interface displays real-time cooking information, ensuring products are cooked to perfection.

Safety and durability are paramount in the design of the Henny Penny FM07-020-F. It features a cool-to-the-touch exterior, minimizing the risk of burns, while the stainless steel construction ensures longevity and ease of cleaning. Its efficient design also includes a safety shut-off feature, which prevents overheating and potential hazards.

In summary, the Henny Penny FM07-020-F fryer sets a high standard in commercial frying solutions. Its combination of advanced technologies, including a reliable oil delivery system, intelligent filtration, and user-friendly controls, makes it an invaluable asset for any culinary operation seeking to enhance productivity while delivering exceptional fried food quality. With safety and efficiency at its core, it remains an outstanding choice for chefs and food service professionals alike.
Top Page Image Contents