Henny Penny OE-100 manual High Temperature

Page 4

Model OE-100

2-5. HIGH TEMPERATURE

LIMIT CONTROL (Continued)

Before following these steps, place POWER switch in the OFF position and unplug the power cord or open the wall circuit breaker.

1.If the tube is broken or cracked, the control will open, shutting off electrical power. The control cannot be reset.

Use replacement high limit, part no. 16337, 420 degree.

2.Drain shortening from the frypot.

3.Remove control panel per Section 2-3.

4.Remove the retainer securing the silicone gasket.

5.Loosen small inside screw nut on capillary tube.

6.Remove capillary bulb from bulb holder inside the frypot.

7.Straighten the capillary tube.

8.Remove larger outside nut that threads into pot wall.

9.Remove the two nuts that hold the high limit bracket from control panel area.

10.Lift defective control from control panel area.

11.Insert new control and replace nuts to bracket.

12.Uncoil capillary line, starting at capillary tube, and insert through frypot wall.

To avoid electrical shock or other injury, the capillary line must run under and away from all electrical power wires and terminals. The tube must never be in such a position where it could accidentally touch the electrical power terminals.

13.Carefully bend the capillary bulb and tube toward bulb holder on heating elements.

14.Slip capillary bulb into bulb holder located on heating elements. Pull excess capillary line from pot and tighten nut into frypot wall.

409

2-4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Introduction Test InstrumentsRemoving Control PanelRemoving the Control Panel Thermal SensorHigh Temperature Limit Control Thermal SensorHigh Temperature Limit Control High TemperatureHeating Elements Replacement Heating ElementsTest Points Results Heat Contactor ContactorsTest Points Results Primary Contactor Place ON/OFF switch to the OFF position and unplug Power cord to open the wall circuit breakerTest Points Results FANCOOK/PUMP Switch Checkout ReplacementDrain Switch FusesFilter Heater Switch Filter Heater Shortening with temperature in excess of 200 of flows Hose assembly leaks or rupturesThrough this filter rinse hose. Heat causes the rubber hose To age and deteriorate. The hose and fittings should beFilter Valve Filter PumpWhen removing a pump from a motor note the positions Fryer. There is an indicator on the side of the two halvesMotor in any other position could cause damage to Pump, this mark must be together and face to the frontReplacement MaintenancePumpand Motor Cooling FANRestore power to unit and unit is now ready for operation Fuse, or electrical shock could resultHenny Penny Model OE-100 994 1197 Henny Penny Model OE-100 Henny Penny Model OE-100 694 Henny Penny Model OE-100 1294

OE-100 specifications

The Henny Penny OE-100 is a premier commercial pressure fryer that stands out in the fast-food and restaurant industries for its efficiency, versatility, and superior frying capabilities. Designed to enhance the cooking process, the OE-100 brings innovation and reliability to kitchens, making it an essential tool for operators looking to serve high-quality fried foods consistently.

One of the key features of the Henny Penny OE-100 is its advanced frying technology. The pressure frying system allows for faster cooking times while sealing in moisture and flavor. This technology not only produces crispy, golden-brown fried products but also helps to reduce the amount of oil absorption, leading to healthier meal options. The pressure cooking process shortens the cooking time by using pressurized steam, which raises the boiling point of water. This means foods can be cooked quickly without compromising texture or taste.

Another notable characteristic of the OE-100 is its energy efficiency. The fryer is designed to use less oil, making it environmentally friendly and cost-effective. Additionally, the machine incorporates insulation that minimizes heat loss, which optimizes energy consumption. This is particularly beneficial for high-volume operations where reducing operational costs is crucial.

The OE-100 also features user-friendly controls, making it easy for operators to set precise cooking times and temperatures. This precision promotes consistency in food quality, ensuring that every batch of fried products meets a restaurant's high standards. Safety is another priority in the design of the OE-100, which includes features such as a built-in safety valve, automatic lid locking mechanisms, and cool-to-the-touch exteriors to minimize the risk of burns which are common in commercial frying operations.

Furthermore, the Henny Penny OE-100 is made with durable materials, ensuring longevity in rugged kitchen environments. Its compact design allows it to fit into various kitchen layouts, while still providing ample frying capacity.

Overall, the Henny Penny OE-100 stands as a benchmark in pressure frying technology, combining advanced features, energy efficiency, and safety to deliver exceptional results in commercial kitchens. Its ability to produce delicious, high-quality fried foods makes it a favorite among culinary professionals.
Top Page Image Contents