Henny Penny OE-100 manual Contactors, Test Points Results Heat Contactor

Page 7

Henny Penny

Model OE-100

2-7. CONTACTORS

The following checks are performed with the wall circuit breaker closed and the Power switch in the ON position. Extreme caution should be taken. Make connections before applying power, take reading, and Remove power before removing meter leads.

1.With power applied, increase setpoint temperature setting allow- ing heat contactor to activate.

Test Points

Results

Heat Contactor

The voltage

from terminal 34 to 35

should read the

from terminal 35 to 36

same at each

from terminal 34 to 36

terminal.

Test Points

Results

Primary Contactor

It should

from terminal 27 to 28

correspond to

from terminal 28 to 29

the voltage

from terminal 27 to 29

rating stated on

 

the data plate.

If either contactor is defective, it must be replaced as follows:

1.Remove electrical power supplied to the fryer by unplugging or opening the wall circuit breaker.

2.Remove only those wires directly connected to the contactor being replaced. Label the wires.

3.Remove the two mounting screws on the base plate and remove contactor.

4.Install the new contactor and tighten the two mounting screws.

5.Connect the labeled wires to their respective positions.

6.Install the control panel.

7.Reconnect power to the fryer and test the fryer for proper operation.

593

2-7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Control Panel IntroductionTest Instruments RemovingThermal Sensor Removing the Control PanelThermal Sensor High Temperature Limit ControlHigh Temperature Limit Control High TemperatureHeating Elements Heating Elements ReplacementTest Points Results Heat Contactor ContactorsTest Points Results Primary Contactor FAN Place ON/OFF switch to the OFF position and unplugPower cord to open the wall circuit breaker Test Points ResultsCheckout Replacement COOK/PUMP SwitchFuses Drain SwitchFilter Heater Switch Filter Heater To age and deteriorate. The hose and fittings should be Shortening with temperature in excess of 200 of flowsHose assembly leaks or ruptures Through this filter rinse hose. Heat causes the rubber hoseFilter Pump Filter ValvePump, this mark must be together and face to the front When removing a pump from a motor note the positionsFryer. There is an indicator on the side of the two halves Motor in any other position could cause damage toCooling FAN ReplacementMaintenance Pumpand MotorFuse, or electrical shock could result Restore power to unit and unit is now ready for operationHenny Penny Model OE-100 994 1197 Henny Penny Model OE-100 Henny Penny Model OE-100 694 Henny Penny Model OE-100 1294

OE-100 specifications

The Henny Penny OE-100 is a premier commercial pressure fryer that stands out in the fast-food and restaurant industries for its efficiency, versatility, and superior frying capabilities. Designed to enhance the cooking process, the OE-100 brings innovation and reliability to kitchens, making it an essential tool for operators looking to serve high-quality fried foods consistently.

One of the key features of the Henny Penny OE-100 is its advanced frying technology. The pressure frying system allows for faster cooking times while sealing in moisture and flavor. This technology not only produces crispy, golden-brown fried products but also helps to reduce the amount of oil absorption, leading to healthier meal options. The pressure cooking process shortens the cooking time by using pressurized steam, which raises the boiling point of water. This means foods can be cooked quickly without compromising texture or taste.

Another notable characteristic of the OE-100 is its energy efficiency. The fryer is designed to use less oil, making it environmentally friendly and cost-effective. Additionally, the machine incorporates insulation that minimizes heat loss, which optimizes energy consumption. This is particularly beneficial for high-volume operations where reducing operational costs is crucial.

The OE-100 also features user-friendly controls, making it easy for operators to set precise cooking times and temperatures. This precision promotes consistency in food quality, ensuring that every batch of fried products meets a restaurant's high standards. Safety is another priority in the design of the OE-100, which includes features such as a built-in safety valve, automatic lid locking mechanisms, and cool-to-the-touch exteriors to minimize the risk of burns which are common in commercial frying operations.

Furthermore, the Henny Penny OE-100 is made with durable materials, ensuring longevity in rugged kitchen environments. Its compact design allows it to fit into various kitchen layouts, while still providing ample frying capacity.

Overall, the Henny Penny OE-100 stands as a benchmark in pressure frying technology, combining advanced features, energy efficiency, and safety to deliver exceptional results in commercial kitchens. Its ability to produce delicious, high-quality fried foods makes it a favorite among culinary professionals.
Top Page Image Contents