Henny Penny OE-100 manual Pumpand Motor, Replacement, Cooling FAN, Maintenance, Once a Month

Page 16

Henny Penny

Model OE-100

2-18. PUMPAND MOTOR

1. To replace the pump and motor assembly, insure the main power

REPLACEMENT

has been removed from the fryer.

To avoid electrical shock, injury or burns before starting this procedure move COOK/PUMP SWITCH to OFF position. Disconnect main circuit breaker at the main circuit breaker box and unplug service cord from wall receptacle.

2. Remove the cover from the junction box and remove the wire nuts attaching wires leading into the flexible conduit going to the motor.

3. Loosen the two screws securing the flexible conduit going to the motor.

4. Remove tubing to the pump.

5. Remove hardware attaching the motor to the motor hase bracket and remove motor and pump assembly.

2-19. COOLING FAN

The cooling fan on the OE-100A open fryer reduces the amount

MAINTENANCE

of heat behind the panel, and if the heat does become excessive,

 

"E-4" will show on the display.

 

The PC boards on the control panels can be damaged by exces-

 

sive amount of heat so it is important that the cooling fan is

 

operating properly and has good air flow.

 

To prevent an "E-4" reading, which will shut the heat off to the

 

fryer, follow the following steps.

ONCE A MONTH:

1.Turn power switch to the "OFF" position.

2.Open door to bottom of fryer.

3.Locate metal fan guard situated in the left front, under the control panel.

4.Clean any lint and dirt from fan guard.

294

2-16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Introduction Test InstrumentsRemoving Control PanelRemoving the Control Panel Thermal SensorHigh Temperature Limit Control Thermal SensorHigh Temperature Limit Control High TemperatureHeating Elements Replacement Heating ElementsTest Points Results Heat Contactor ContactorsTest Points Results Primary Contactor Place ON/OFF switch to the OFF position and unplug Power cord to open the wall circuit breakerTest Points Results FANCOOK/PUMP Switch Checkout ReplacementDrain Switch FusesFilter Heater Switch Filter Heater Shortening with temperature in excess of 200 of flows Hose assembly leaks or rupturesThrough this filter rinse hose. Heat causes the rubber hose To age and deteriorate. The hose and fittings should beFilter Valve Filter PumpWhen removing a pump from a motor note the positions Fryer. There is an indicator on the side of the two halvesMotor in any other position could cause damage to Pump, this mark must be together and face to the frontReplacement MaintenancePumpand Motor Cooling FANRestore power to unit and unit is now ready for operation Fuse, or electrical shock could resultHenny Penny Model OE-100 994 1197 Henny Penny Model OE-100 Henny Penny Model OE-100 694 Henny Penny Model OE-100 1294

OE-100 specifications

The Henny Penny OE-100 is a premier commercial pressure fryer that stands out in the fast-food and restaurant industries for its efficiency, versatility, and superior frying capabilities. Designed to enhance the cooking process, the OE-100 brings innovation and reliability to kitchens, making it an essential tool for operators looking to serve high-quality fried foods consistently.

One of the key features of the Henny Penny OE-100 is its advanced frying technology. The pressure frying system allows for faster cooking times while sealing in moisture and flavor. This technology not only produces crispy, golden-brown fried products but also helps to reduce the amount of oil absorption, leading to healthier meal options. The pressure cooking process shortens the cooking time by using pressurized steam, which raises the boiling point of water. This means foods can be cooked quickly without compromising texture or taste.

Another notable characteristic of the OE-100 is its energy efficiency. The fryer is designed to use less oil, making it environmentally friendly and cost-effective. Additionally, the machine incorporates insulation that minimizes heat loss, which optimizes energy consumption. This is particularly beneficial for high-volume operations where reducing operational costs is crucial.

The OE-100 also features user-friendly controls, making it easy for operators to set precise cooking times and temperatures. This precision promotes consistency in food quality, ensuring that every batch of fried products meets a restaurant's high standards. Safety is another priority in the design of the OE-100, which includes features such as a built-in safety valve, automatic lid locking mechanisms, and cool-to-the-touch exteriors to minimize the risk of burns which are common in commercial frying operations.

Furthermore, the Henny Penny OE-100 is made with durable materials, ensuring longevity in rugged kitchen environments. Its compact design allows it to fit into various kitchen layouts, while still providing ample frying capacity.

Overall, the Henny Penny OE-100 stands as a benchmark in pressure frying technology, combining advanced features, energy efficiency, and safety to deliver exceptional results in commercial kitchens. Its ability to produce delicious, high-quality fried foods makes it a favorite among culinary professionals.
Top Page Image Contents