Henny Penny OE-100 manual Removing the Control Panel, Thermal Sensor

Page 2

Henny Penny

Model OE-100

2-3. REMOVING THE CONTROL PANEL (Continued)

2-4. THERMAL SENSOR

3.Panel will now swing out with hinge located on left side of panel.

4.Pulling down on the spring loaded hinge pin, pull control panel straight out to completely remove.

NOTE

When completely removing control panel, all wiring must be unplugged from control panel. Be sure to mark wires before removing.

5. Install panel board by reversing order.

The thermal sensor determines the shortening temperature. If a mal- function does occur, an E6 will be displayed on the digital readout. Turn unit to OFF position, then back to COOK position. If E6 is still displayed, the thermal sensor must be replaced by following these steps:

1.Remove electrical power supplied to fryer.

Place POWER switch in the OFF position and unplug the power cord or remove power from the fuse or breaker box.

2.Drain the shortening from frypot.

3.Remove two decorative strips located on each side of control panel and let control panel swing out.

593

2-2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Removing IntroductionTest Instruments Control PanelRemoving the Control Panel Thermal SensorHigh Temperature Limit Control Thermal SensorHigh Temperature Heating Elements High TemperatureLimit Control Replacement Heating ElementsTest Points Results Primary Contactor ContactorsTest Points Results Heat Contactor Test Points Results Place ON/OFF switch to the OFF position and unplugPower cord to open the wall circuit breaker FANCOOK/PUMP Switch Checkout ReplacementDrain Switch FusesFilter Heater Switch Filter Heater Through this filter rinse hose. Heat causes the rubber hose Shortening with temperature in excess of 200 of flowsHose assembly leaks or ruptures To age and deteriorate. The hose and fittings should beFilter Valve Filter PumpMotor in any other position could cause damage to When removing a pump from a motor note the positionsFryer. There is an indicator on the side of the two halves Pump, this mark must be together and face to the frontPumpand Motor ReplacementMaintenance Cooling FANRestore power to unit and unit is now ready for operation Fuse, or electrical shock could resultHenny Penny Model OE-100 994 1197 Henny Penny Model OE-100 Henny Penny Model OE-100 694 Henny Penny Model OE-100 1294

OE-100 specifications

The Henny Penny OE-100 is a premier commercial pressure fryer that stands out in the fast-food and restaurant industries for its efficiency, versatility, and superior frying capabilities. Designed to enhance the cooking process, the OE-100 brings innovation and reliability to kitchens, making it an essential tool for operators looking to serve high-quality fried foods consistently.

One of the key features of the Henny Penny OE-100 is its advanced frying technology. The pressure frying system allows for faster cooking times while sealing in moisture and flavor. This technology not only produces crispy, golden-brown fried products but also helps to reduce the amount of oil absorption, leading to healthier meal options. The pressure cooking process shortens the cooking time by using pressurized steam, which raises the boiling point of water. This means foods can be cooked quickly without compromising texture or taste.

Another notable characteristic of the OE-100 is its energy efficiency. The fryer is designed to use less oil, making it environmentally friendly and cost-effective. Additionally, the machine incorporates insulation that minimizes heat loss, which optimizes energy consumption. This is particularly beneficial for high-volume operations where reducing operational costs is crucial.

The OE-100 also features user-friendly controls, making it easy for operators to set precise cooking times and temperatures. This precision promotes consistency in food quality, ensuring that every batch of fried products meets a restaurant's high standards. Safety is another priority in the design of the OE-100, which includes features such as a built-in safety valve, automatic lid locking mechanisms, and cool-to-the-touch exteriors to minimize the risk of burns which are common in commercial frying operations.

Furthermore, the Henny Penny OE-100 is made with durable materials, ensuring longevity in rugged kitchen environments. Its compact design allows it to fit into various kitchen layouts, while still providing ample frying capacity.

Overall, the Henny Penny OE-100 stands as a benchmark in pressure frying technology, combining advanced features, energy efficiency, and safety to deliver exceptional results in commercial kitchens. Its ability to produce delicious, high-quality fried foods makes it a favorite among culinary professionals.
Top Page Image Contents