Hoshizaki JWE-620UA-6B Service Menu Chart Auxiliary Code U-1, U-2, U-3, V-0, A-0, Default

b) Service Menu Chart (Auxiliary Code U-1, U-2, U-3, V-0, A-0)

Service	Item and Details	Setting Range	Display	Factory
Menu				Default
01	Wash Cycle Time	1 to 99 seconds	1 to 99	41
	(Standard Mode)	(see no. 08 for multiplier)		(41 seconds)
02	Wash Cycle Time	10 to 990 seconds	1 to 99	11
	(Long Mode)	(see no. 09 for multiplier)		(11 seconds)
03	Rinse Cycle Time	5 to 60 seconds	5 to 60	6
04	Wash Temperature Setpoint	32 to 167°F	32 to 167	163
		(0 to 75°C)	(0 to 75)	(73)
05	Rinse Temperature Setpoint	32 to 185°F	32 to 185	185
		(0 to 85°C)	(0 to 85)	(85)
07	Auto Fill Cycle	Rinse pump energized	5 to 30	28
		5 to 30 times
08	Wash Cycle Time Multiplier	1x or 10x	1 or 10	1
	(Standard Mode)
09	Wash Cycle Time Multiplier	1x or 10x	1 or 10	10
	(Long Mode)
11	Wash/Rinse Cycle Start	ON: start initiated by closing	on or oF	on
	Initiation	door
		OFF: start initiated by pressing
		"STANDBY/CLEANING" button
12	Water Temperature Display	ON: wash water temperature	on or oF	on
		displayed in ready mode or
		standby
		OFF: rinse water temperature
		displayed in ready mode or
		standby
13	Temperature Display Scale	Fahrenheit or Celsius	°F or °C	°F
14	Internal Booster Tank Energy	ON or OFF	on or oF	oF
	Saving Mode
15	Water Temperature Drop for	Setpoint minus 0 to 40°F	0 to 40	15
	Internal Booster Tank Energy	(Setpoint minus 0 to 22°C)	(0 to 22)	(8)
	Saving Mode
16	Idle Time Before Internal	0 to 99 minutes	0 to 99	15
	Booster Tank Energy Saving
	Mode Begins
17	Minimum Internal Booster	180 to 185°F	180 to 185	180
	Tank Water Temperature to	(82 to 85°C)	(82 to 85)	(82)
	Start Rinse Cycle (Stop Wash
	Cycle) when Internal Booster
	Tank Energy Saving Mode is
	On
21	Error Log	NA	Most Recent	NA
through			Errors
25	Note: To erase the log, press		21 is most
	and hold the up and down		recent.
	buttons for 3 seconds with one		"--" is displayed
	of the error codes displayed.		if the log is
	The unit beeps once and the		empty.
	entire log clears.

20