Hoshizaki JWE-620UA-6B service manual Temperature Display

21	Total Operation Cycles Before	10 to 990 cycles	1 to 99	2
	Alert			(20 cycles)
22	Display Hold Function	ON: stays on	on or oF	oF
		OFF: goes off after 10 minutes
23	Power Supply Lock Function	ON: "Ch" keeps flashing until	on or oF	oF
		electrode is turned off
		OFF: "Ch" goes off when "ON/
		OFF" button is switched off
24	N/A
25	N/A
26	Error Log	NA	Most Recent	NA
through			Errors
30	Note: To erase the log, press		26 is most
	and hold the up and down		recent.
	buttons for 3 seconds with one		"--" is displayed
	of the error codes displayed.		if the log is
	The unit beeps once and the		empty.
	entire log clears.

8. Temperature Display

•Indicates the average water temperature read by the wash tank or internal booster tank thermistor. Indicates wash tank water temperature in wash cycle, rinse (internal booster tank) water temperature in rinse cycle. Press the down button to indicate rinse (internal booster tank) water temperature instead of wash tank water temperature while the dishwasher is in "READY" mode. To change the normal temperature display to the rinse (internal booster tank) water temperature, see "Water Temperature Display" (service menu item 12) in "II. D.7.b) Service Menu Chart."

•The temperature display range is 32°F to 199°F (0°C to 99°C). To change the display scale, see "Temperature Display Scale" (service menu item 13) in "II.D.7.b) Service Menu Chart."

•The temperature display updates every 30 seconds for the wash tank and every 5 seconds for the internal booster tank.

22