Hoshizaki DCM-750BAH(-OS) III. Cleaning and Maintenance, A. Cleaning and Sanitizing Instructions

III. Cleaning and Maintenance

WARNING

CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after any cleaning or maintenance is done to the unit. Make sure that none have fallen into the storage bin.

A. Cleaning and Sanitizing Instructions

Hoshizaki recommends cleaning and sanitizing this unit at least twice a year. More frequent cleaning and sanitizing, however, may be required in some existing water conditions.

WARNING

1.To prevent injury to individuals and damage to the icemaker, do not use ammonia type cleaners.

2.Carefully follow any instructions provided with the bottles of cleaning and sanitizing solution.

3.Always wear liquid-proof gloves and goggles to prevent the cleaning and sanitizing solutions from coming into contact with skin or eyes.

4.After cleaning and sanitizing, do not use ice made from the cleaning and sanitizing solutions. Be careful not to leave any solution on the parts or in the storage bin.

Extruding Head	Spout A
Reservoir	Spout B
	Ice Guide
Power Switch	Drain Pipe Holder
	Drain Pipe
	Bin Control Assembly

	Agitators
Float Switch
	Dispensing
Evaporator Assembly	Auger
	Agitating Motors

Dispensing Motor

Storage Bin Cover

Control Switch

Dispense Mode Switch Safety Switch Spout Cover

Fig. 9

Optical Sensors (-OS)

25