Hoshizaki DCM-750BAH(-OS), DCM-750BWH(-OS) instruction manual DCM-750BAH-OS, Fig, Icemaker

1. Icemaker

•Icemaker water supply inlet is 1/2" female pipe thread (FPT). A minimum of 3/8" OD copper tubing is recommended for the icemaker water supply line.

•An icemaker water supply line shut-off valve and drain valve should be installed.

•Storage bin and drip tray drain outlets are 3/4" FPT. A minimum of 3/4" OD hard pipe is recommended for the storage bin and drip tray drain lines.

Icemaker

Icemaker Water	Icemaker Water Supply
Supply Inlet	Line Shut-Off Valve
1/2" FPT

Storage Bin
Drain Outlet	Icemaker Water Supply
3/4" FPT	Line Drain Valve

Drip Tray
Drain Outlet	Stand
3/4" FPT

Separate piping to approved drain. Leave a two-inch (5 cm) vertical air gap between the end of each pipe and the drain.

Two-inch

(5 cm) air

gap

Vent

Tube

Fig. 4	Floor	Drain
	DCM-750BAH(-OS)

19