Hoshizaki DCM-750BWH(-OS), DCM-750BAH(-OS) I. Controls and Adjustments, Fig, Portion Control

9)Disengage the safety switch. Move the control switch to the "OFF" position, then move the power switch to the "OFF" position. Turn off the power supply.

10)Clean the storage bin liner and the storage bin cover using a neutral cleaner. Rinse thoroughly after cleaning. Replace the storage bin cover in its correct position.

WARNING! CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place. Make sure that none have fallen into the storage bin.

11)Move the power switch to the "ON" position, then replace the front panel in its correct position. Turn on the power supply, then move the control switch to the "ICE" position to start the automatic icemaking process.

I. Controls and Adjustments

1. Portion Control

A variable resistor which controls the amount of ice dispensed is located on the control board.

The figures on the label indicate dispensing time (sec.). See Fig. 8. When shipped, the portion control is set at the minimum dispensing time (0.6 sec.).

DCM-750BAH(-OS); DCM-750BWH(-OS) . . . . . . . . . . . . Approximately 0.72 oz./0.6 sec.

Approximate amount of ice dispensed per second.

DCM-750BAH(-OS); DCM-750BWH(-OS) . . . . . . . . . . . . Approximately 1.2 oz./sec.

Fig. 8

24