Hoshizaki L1F015102 instruction manual Location

Page 10

Separator (inside)

* KM-201BAH, KM-260BAH only

Door

Air Inlet*

(Air Filter)

Air Filter*

 

Louver

How to remove Louver

 

Magnet Catch

Fig. 1

C. Location

WARNING

This icemaker is not intended for outdoor use. Normal operating ambient temperature should be within +45°F to +100°F (+7°C to +38°C); Normal operating water temperature should be within +45°F to +90°F (+7°C to +32° C). Operation of the icemaker, for extended periods, outside of these normal temperature ranges may affect production capacity.

For best operating results:

*The icemaker should not be located next to ovens, grills or other high heat producing equipment.

*Level the icemaker from side to side and front to rear by adjusting the legs. The location should provide a firm and level foundation for the equipment.

*Avoid a site where dripping is not allowed.

*This icemaker will not work at subfreezing temperatures. To prevent damage to the water supply line, drain the icemaker when air temperature is below zero.

*Allow at least 2” (5 cm) clearance at the right side for proper air circulation and at least 0.6” (15 mm) clearance at top for ease of maintenance and/or service.

7

Image 10
Contents KM-201BAH KM-260BAH KM-201BWH KM-260BWH Hoshizaki AMERICA, INC Contents Specifications Nameplate Rating KM-260BWHDimensions/Connections KM-201BAHKM-260BAH KM-201BWH KM-260BWH How to Remove Panels See Fig Location Set Up Electrical ConnectionWater Supply and Drain Connections See Figs KM-201BAH KM-201BWH KM-260BWH Final Checklist Startup Cleaning III. Cleaning and Maintenance InstructionsCleaning Procedure Thumbscrew Bracket L Evaporator Cube Guide Water Tank Sanitizing Procedure Following Cleaning Procedure Exterior Panels MaintenanceStorage Bin and Scoop Condenser Preparing the Icemaker for Long StorageAir Filter Remove the water from the potable water supply lineDrain the potable Water Tank