*Drain lines should not be piped directly to the sewer system. An air gap of a minimum of 2 vertical inches (5 cm) should be between the end of the drain pipes from the icemaker and the floor drain.
*This icemaker should be installed in accordance with applicable national, state and local regulations.
*A plumbing permit and services of a licensed plumber may be required in some areas.
KM-201BAH
Water Supply Inlet 1/2” FPT
1/4” fall per foot
To approved floor drain
Drain Valve
Separate piping to approved drain. Leave a
Floor
Drain
Fig. 4
10