Hoshizaki L1F015102 instruction manual Drain the potable Water Tank

Page 22

5)Allow the line to drain by gravity.

6)Attach compressed air or carbon dioxide supply to the potable water supply line Drain Valve.

7)Move the Control Switch to the “ICE” position.

8)Quickly blow the potable water supply line out using compressed air or carbon dioxide.

2.Drain the potable Water Tank:

1)Move the Control Switch to the “SERVICE” position and the Service Switch to the “DRAIN” position.

2)After 2 minutes, move the Control Switch to the “OFF” position.

3)Open the Door. Remove all ice from the Storage Bin and clean the Storage Bin.

4)Close the Door.

5)Replace the Louver in its correct position.

6)Turn off the power supply at the breaker box.

7)Close the potable water supply line Drain Valve.

19

Image 22
Contents KM-201BAH KM-260BAH KM-201BWH KM-260BWH Hoshizaki AMERICA, INC Contents Specifications Nameplate Rating KM-260BWHDimensions/Connections KM-201BAHKM-260BAH KM-201BWH KM-260BWH How to Remove Panels See Fig Location Set Up Electrical ConnectionWater Supply and Drain Connections See Figs KM-201BAH KM-201BWH KM-260BWH Final Checklist Startup Cleaning III. Cleaning and Maintenance InstructionsCleaning Procedure Thumbscrew Bracket L Evaporator Cube Guide Water Tank Sanitizing Procedure Following Cleaning Procedure Exterior Panels MaintenanceStorage Bin and Scoop Condenser Preparing the Icemaker for Long StorageAir Filter Remove the water from the potable water supply lineDrain the potable Water Tank