Toshiba B-SX600 manual Loading the Media, How to Load the Media

5. LOADING THE MEDIA

This section describes how to load the media.

Before using the Peel-off Unit or fanfold paper, please read Section 5.1 How to Load the Media carefully first. Then, refer to section 5.2 How to Load the Paper for the Model with the Peel-off Unit or section 5.3 How to Load Fanfold Paper.

WARNING!

1. Do not touch any moving parts. To reduce the risk of fingers, jewellery, clothing, etc., being drawn into the moving parts, be sure to load the media once the printer has stopped moving completely.

2. The Print Head becomes hot immediately after printing. Allow it to cool before loading the media.

3. Care must be taken not to catch your fingers in the covers when opening or closing them.

NOTE:

For the specification of available media, refer to Section 3.1 Supply Specifications.

5.1How to Load the Media

1.Open the Side Cover completely.

2.Push up the Upper Unit Unlock Lever to unlock the Upper Unit. Hold and lift the Upper Unit Handle until it is locked.

Upper Unit

3.While squeezing the Unlock Levers of the Media Roll Holder, slide the Media Roll Holder outside.

Media Roll Holder

Upper Unit Unlock Lever

Unlock Lever

5- 1