Printer Model with a LAN Interface, Http | Toshiba B-SX600 guide

14. SPECIFICATIONS

14.2 Printer (Model with a LAN Interface)

Item					Specifications
Model				B-SX600-HS12/HH12/HC12-QM-R

Resolutions (dot density)				600 dpi (23.6 dots/mm)

Printing method				Thermal transfer / Direct thermal

Print speed				Max. 150 mm/second ∗1
Media alignment				Centre

Max. effective print width					104 mm

Max. print length					1,000 mm

Available media width				15 to 120 mm

			LCD		Graphic LCD (128 dots × 64 dots)
Operation Panel
Operation Panel			LED	Power (green), Ready (green), Error (red), Data (green)

			Key		Pause, Feed, Menu, ▲, ▼, W, X, Enter, Cancel

Host interface					10BASE-T / 100BASE-TX (IEEE802.3)

Print protocol					LPR, PORT9100 (unidirectional), PORT9100 (bi-directional)

LPR queue name					lp

Control protocol					HTTP

Operating system					Windows 2000, Windows XP, Windows Server 2003, Windows
Operating system					Vista
					Vista
			Depth		455 mm
Dimension
Dimension			Width		300 mm

			Height		353.5 mm (including the rubber feet)

Weight				21.0 kg

			Input		100 VAC to 240 VAC
			voltage		100 VAC to 240 VAC
			voltage
Rating			Frequency		50/60 Hz (48 to 62 Hz)

			Power		250 W or less under normal operation:
			consumption		250 W or less under normal operation:
Noise					75 dB or less

Operating temperature range					5 to 40 °C (Print quality guaranteed at temperatures between
Operating temperature range					18 and 28 °C)
					18 and 28 °C)
Operating humidity range					10 to 90% (Print quality guaranteed at humidity between 40
Operating humidity range					and 60%)
					and 60%)
Storage temperature range				-20 to 70 °C

Storage humidity range					5 to 90%

Safety and EMC Standard					CE, TÜV GS, C-Tick, UL, CUL, FCC, ICE , CCC

Environmental standard					RoHS Directive-compliant

∗1 There are limitations on a print speed depending on the media or ribbon type and an image to print.

14- 2

Image 104

Toshiba B-SX600 manual Printer Model with a LAN Interface, Http

Contents

SX600 Series CE Compliance for EU only Vorsicht Safety Summary Meanings of Each Symbol Precautions Table of Contents Test Print Specifications Product Overview Introduction Accessories CD-ROM Part Names and Functions Front View USB Interface Connector AC Power Inlet Fanfold Paper SlotRear View Model with a USB interface Ventilation Slot LAN Interface Connector Rear View Model with a LAN interface Interior Media End Sensor Reflective Media Sensor Media HolderMedia Roll Damper Platen Media Roll Guide Media Guide Print Head Upper Unit Upper Unit Handle Ribbon Tensioner Upper Unit Unlock Lever Menu key Cancel keyOperation Panel Cutter Unit Cut position Precautions when using the Cutter Unit Peel-off Unit Part names Precautions when using the Peel-off Unit Supplemental Remarks Removing the Protective Materials Printer SetupPrecautions Printer Setup Printer Setup Installation Location 40 C Connecting the Power Cord Example of US Type Connecting the Printer with a USB Interface to Your Computer Connecting the Printer with a LAN Interface to Your Computer Media and Ribbon Supply SpecificationsStrip mode Cut mode Die-cut label Notched media Label with black marks Guaranteed Print Area When you purchase media and ribbons Storage of Media and RibbonsUnacceptable Media and Ribbons Preprinted Media Media and Ribbon Precaution Loading the Ribbon Release button Gently squeeze the metal. plate Precautions How to Load the Media Loading the Media Loading the Media Low Supplemental Remarks How to Load the Media for the Model with the Peel-off Unit Please read .1 How to Load the Media first Precautions Loading the Media Loading the Media How to Load a Narrow Label Stock How to Reload the Media when the Upper Unit is Lifted How to Load Fanfold Paper Printing from Your Computer Print Test from Printer Driver Printing from Your Computer Printing from Your Computer Precautions when Using the Model with a LAN Interface Printing from Your Computer Media Feed Mode Fixed Length feed modeStrict feed mode Easy feed mode Printer Operation Printer Operation Tear-off Alignment Alignment is performed Alignment when Precise print mode is selected Alignment when Paper saving mode is selected Alignment when Fixed Length feed mode is selected Media Calibration How to perform a media calibration Printer Operation Printer Operation Operation Panel Operation Panel Messages Displayed on the Operation Panel Display when Pause is shown Display when Printing is shown Error messages in the event of End of paper Display in Low Power Mode → See .4 Menu Options Printer Operation using the Operation PanelOperation Operational procedures Menu Options Information Title Description Trip Test print menu Reprint Error Page menuClear Trip Meter menu Low Power min Conditions Beep Volume How to Cancel a Print Job Operation Panel Print Test Pattern How to Perform a Print TestTest Print Removing Jammed Media Removing Jammed Media from the Cutter Unit Removing Jammed Media from the Peel-off Unit Daily Maintenance Cleaning the Media Sensor Cleaning the Platen Cleaning the Ribbon Separation Plate Cleaning the Ribbon Guide Bar Cleaning the Print Head Cleaning the Peel-off Unit Troubleshooting Problems at Start-up of the PrinterProblems while Printing Printing does not start ⇒2.4 or 2.5 Connecting the Printer to Your ⇒8.5 How to Cancel a Print JobComputer ⇒ 3.7 Unacceptable Media and Ribbons Loaded ribbon is torn or ejected with the media ⇒ 11.3 Cleaning the Ribbon Separation PlateBlank page label is ejected Printed text is blurred Print FailureAn entire or a part of printout is light ⇒ 2.2 Installation Location Printouts have streaky smudges or fine lines ⇒ 7.4 Media Calibration ⇒ 7.1 Media Feed ModePrint position gradually misaligns ⇒ 8.5 How to Cancel a Print Job ⇒ Help on the Printing Preferences Problems in the Network Model with a LAN Interface ⇒ 2.5 Connecting the Printer to Your Computer Error messages and remedial measures How to Load the Media ⇒ 1.5.2 Precaution when using the Peel-off Unit⇒ 1.4.2 Precautions when using the Cutter Unit Peeling failed Error messages Possible causes Solutions Info. Error Action Info.ErrorImage Info.Error Possible causes Solutions Bad thermal head Can I use an ink ribbon narrower than a label? Frequently Asked Questions FAQHow can I use the printer with the covers left open? Ribbon is torn apart during printing. What should I do? Peeling failure occurs more frequently than before Frequently Asked Questions FAQ Standard model Remarks Printer Model with a USB Interface SpecificationsSpecifications Printer Model with a LAN Interface Http Snmp Simple Network Management Protocol Specifications Cutter Unit Power Cord When purchasing the power cordPage EO1-33085