3. MEDIA AND RIBBON
3.2 Die-cut label
“Die-cut label” refers to a label stock of which labels are die cut one by one and surroundings are removed, as illustrated below.
When a die-cut label stock is loaded, either the Transmissive Media Edge Sensor or the Transmissive Media Centre Sensor is used to detect a print position. The Transmissive Media Centre Sensor is located at the centre of the label feed path. (→ 1.3 Part Names and Functions)
Precautions
･The Transmissive Media Edge Sensor must be placed so that it does not come into contact with the media.
15 to 120 mm
20 mm or less | | | | | | | |
| | | | | | | R2 mm or less |
Gap | | | | 25 mm |
| | | | |
2 to 13 mm
Label pitch
5 to 1,000 mm
Page start line
Transmissive Media
Edge Sensor
Media feed direction
