4. LOADING THE RIBBON

5.In the same way described in Step 3, move the Ribbon Stopper of the Ribbon Shaft (Take-up side) in accordance with the width of the Ribbon Core. Fit a Ribbon Core onto the Ribbon Shaft (Take-up side).

[Supplemental Remarks]

The Ribbon Core can be placed on the Ribbon Shaft (Take-up side) more easily by gently holding and squeezing the centre of the metal plate of the Ribbon Shaft (Take-up side).

Metal plate

Gently squeeze the metal. plate.

6.Unroll and draw the ribbon under the Upper Unit, and affix the leading edge of the ribbon (self-adhesive) to the Ribbon Core.

7.Turn the knob of the Ribbon Shaft (Take-up side) several times to take up the ribbon.

Precautions

Be careful not to twist or wrinkle the ribbon while taking up the ribbon onto the Ribbon Core.

4- 3

Page 36
Image 36
Toshiba B-SX600 manual Gently squeeze the metal. plate, Precautions