Hoshizaki KM-2000SWH3, KM2000SWF3, KM-2000SRH3, KM-2000SRF3 service manual

Page 51

[2]Remove the water from the potable water supply line:

1)Remove the Front Panel. (Except water-cooled model)

2)Move the Control Switch, on the Control Box, to the “OFF” position.

3)Wait 3 minutes.

4)Close the Potable Water Supply Line Shut-off Valve and open the Potable Water Supply Line Drain Valve.

5)Allow the line to drain by gravity.

6)Attach compressed air or carbon dioxide supply to the Potable Water Line Drain Valve.

7)Move the Control Switch to the “ICE” position.

8)Blow the potable water line out using compressed air or carbon dioxide.

[3]Drain the Potable Water Tank:

1)Turn off the power supply.

2)Move the Control Switch to the “OFF”

position.

3)Drain the Water Tank by removing the Insulation Panel and the Cap located on the front bottom part of the Ice Dropping Hole. See Fig. 3.

4)Replace the removed parts in their correct positions.

5)Remove all ice from the Storage Bin, and clean the Storage Bin.

6)Replace the Front Panel in its correct position.

7) Close the Drain Valve.

Fig. 3

51

Image 51
Contents Model KM-2000SWF3 KM-2000SRF3 KM-2000SWH3 KM-2000SRH3 Hoshizaki AMERICA, INC Contents Maintenance KM-2000SWF3, KM-2000SWH3 Water-cooled SpecificationsKM-2000SRF3, KM-2000SRH3 Remote air-cooled Condensing Unit Specifications Model URC-20F KM-2000SWF3, KM-2000SWH3 II. General Information ConstructionKM-2000SRF3, KM-2000SRH3 Controller Board Features of Control Products E Controller BoardController Board SOLID-STATE ControlPage Freeze Cycle Beep every 3 sec. = High Evaporator Temperature 127 FMinute Fill Cycle Harvest CycleControl Products HOSHIZAKI001 Board Control Products HOS-001A Board Page Important Water Valve opening is limited to 6 minutes Important Water Valve opening is limited to 6 minutes Controls and Adjustments Setting Time Setting Frequency Checking the Controller Board Page III. Technical Information KM-2000SRF3, KM-2000SRH3 Wiring Diagrams Timing Chart Page Performance Data KM-2000SRF3, KM-2000SRH3 Problem Possible Cause Remedy IV. Service Diagnosis No ICE ProductionController Board Problem Possible Cause Remedy Thermistor Evaporator is Frozen UPLOW ICE Production Abnormal ICEOthers Evacuation and Recharge R-404A Removal and Replacement of ComponentsService for Refrigerant Lines Refrigerant RecoveryBrazing Removal and Replacement of Compressor Important Removal and Replacement of Drier Removal and Replacement of Expansion Valve Removal and Replacement of HOT GAS Valve and Line Valve Removal and Replacement of Evaporator Important Page Adjustment of Water Regulating Valve WATER-COOLED Model only Page Removal and Replacement of Thermistor Caution Removal and Replacement of FAN Motor Removal and Replacement of Pump Motor Removal and Replacement of Water ValveRemoval and Replacement of Spray Tubes Page Page Cleaning Procedure Cleaning Procedure Page Sanitizing Procedure Following Cleaning Procedure Maintenance
Related manuals
Manual 29 pages 20 Kb

KM-2000SWH3, KM-2000SRF3, KM-2000SRH3, KM2000SWF3 specifications

The Hoshizaki KM-2000SRH3 and KM-2000SWH3 are two of the latest innovations in the world of ice-making machines, designed for high-demand commercial settings where reliability and efficiency are key. Known for their durability and performance, these machines are ideal for restaurants, bars, hotels, and other businesses that require a steady supply of ice.

One of the standout features of the KM-2000 series is its production capability. Both models are designed to produce a staggering amount of ice—approximately 2,000 pounds per day. This high output ensures that establishments are never left wanting, meeting the needs of peak service hours without interruption.

Hoshizaki has integrated advanced technologies into these machines to enhance efficiency and reduce downtime. The KM-2000SRH3 and KM-2000SWH3 come equipped with a reliable, self-contained refrigerant system that operates efficiently even in warmer environments. This is particularly important for businesses located in hotter climates, as it ensures that ice production remains consistent throughout the year.

Another notable technology included in both models is the unique crescent-shaped ice that they produce. This type of ice is not only aesthetically pleasing but also offers several functional advantages. The crescent shape allows for excellent cooling properties, making it perfect for drinks, while its hardness and density facilitate longer melting times, ensuring that beverages stay chilled for longer periods.

Additionally, Hoshizaki has incorporated a cleaning and sanitizing system in the KM-2000 series, ensuring that the ice produced is safe and hygienic. This built-in feature is crucial for maintaining health and safety standards in food service operations, reducing the need for manual cleaning and increasing operational efficiency.

In terms of design, both the KM-2000SRH3 and KM-2000SWH3 boast a compact footprint, making them suitable for spaces where size is a constraint. Their stainless steel construction not only adds to their durability but also enhances their visual appeal, fitting seamlessly into any commercial kitchen or bar environment.

Overall, the Hoshizaki KM-2000SRH3 and KM-2000SWH3 ice machines represent a convergence of efficiency, technology, and user-friendly design, making them a top choice for businesses that rely heavily on ice as a part of their service offerings. With their high production capabilities, advanced features, and commitment to quality, these models deliver reliable performance that operators can depend on day in and day out.