InSinkErator HC3/GN3, H770 owner manual Warranty Information, Year warranty

Page 12

Electric Shock Hazard: Using an ungrounded or improperly connected appliance can result in serious injury or death from electrical shock.

This appliance must be grounded. This instant hot water dispenser is equipped with a cord that has a grounding conductor and a grounding pin. The plug must be connected to an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Check with a qualified electrician or serviceman if you are in doubt as to whether the instant hot water dispenser is properly grounded.

Personal Injury: This tank is a non-pressurized tank. DO NOT modify this system.

DO NOT close vent tube or connect other type dispensers or valves to the tank. Use only the InSinkErator dispenser faucet supplied. Use only parts provided. Contact an authorized InSinkErator Service agent for repairs or replacement components.

Fire Hazard: To minimize possibility of fire, DO NOT store flammable items such as rags, paper or aerosol cans near the tank. DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Property Damage: To avoid water damage, replace any loose or split tubing. Periodically inspect the unit for any signs of leakage and immediately remove from service any unit suspected of leaking.

An instant hot water dispenser, like any water heater, has a limited life and will eventually fail. To avoid possible property damage, this instant hot water dispenser should be regularly examined for leakage and replaced when necessary. A drain pan, plumbed to an appropriate drain or outfitted with a leak detector, should be used in those applications where any leakage could cause property damage.

WARRANTY INFORMATION

Dispenser:

3-year warranty

Stainless Steel Tank: 3-year warranty

Covers all replacement parts and labor to correct defects in material or workmanship in the dispenser system, excluding the replaceable filter cartridge, for the full warranty period from the date of installation in your home. If warranty service is required during the warranty period, contact an authorized InSinkErator service agent to replace or repair the unit in your home at no cost to you. If your dispenser is replaced rather than repaired, the warranty on the new unit shall be for the duration of the remaining portion of the original dispenser’s warranty. Note:

Warranty is determined by unit serial number and/or date of installation. Purchase or installation receipt may be required to verify warranty status. When service is required, and for the location of your nearest factory authorized service center, call toll free 1-800-558-5700.

The foregoing warranty does not apply to damage or inoperation resulting from accident, alteration, misuse, abuse, improper installation, installation not in accordance with these instructions or local electrical and/or plumbing codes. We do not assume any responsibility for consequential damage. Install using genuine InSinkErator® manufactured components only. Use of non InSinkErator components will void your warranty.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitations of incidental or consequential damages, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

12

Image 12
Contents Instant Hot Water Dispenser What YOU should Know Before YOU Begin What YOU Need to GET StartedHC-View-SS H-View-SS HC-Wave-SS H-Wave-SS HC3-SS H990-SSH770-SS Components in this Package Preparation If you have to drill through sink orAppropriate tools Installing the Faucet VIEW/ Wave View/Wave For a standard 11⁄2 sink/counter holeView/Wave Hot & Cool models onlyInstalling the Faucet HC3/ GN3 HC3/ GN3HC3 only Installing the Faucet H990 Make sure to use rubber gasket To ensure proper seal H990An assistant may be needed to hold Installing the Faucet H770 Make sure to use fiber gasket To ensure proper seal H770Should cradle all descending tubes Connecting Faucet to Tank Mounting the TankLeave 1/4 for hanging tank Hose clamps are not needed for anyFill Tank & then Connect Power Final Water ConnectionHC-View / HC-Wave / HC3 View / H-Wave / GN3 / H990 / H770Warranty Information Year warrantyFactory temperature pre-set Care and USETroubleshooting Manual del usuario Tarugos para panel de yeso Broca corta-círculos PunzónCómo Usar Este Manual DE Instrucciones Contenido DE Este Paquete Preparación 5 cm⁄4 2 cm Wave-SSInstalación DEL Grifo VIEW/ Wave Únicamente en los modelos caliente y fríoPara un orificio estándar de 11⁄2 de fregaderos o gabinetes El grifo sale de fábrica listo para suInstalación DEL Grifo HC3/GN3 HC3 / GN3HC3 unicamente Instalación DEL Grifo H990 Desempaque los componentes delPara obtener un sellado correcto Daños materiales No apriete ni rompa el tuboInstalación DEL Grifo H770 Para obtener un sellado correcto H770Puede ser necesario un ayudante para ArandelaMontaje DEL Tanque Conexión DEL Grifo EN EL TanqueDrenarlo si es necesario Conexión Final DEL Agua Llene EL Tanque Y Enseguida EnchúfeloView / H-Wave / GN3/ H990 / H770 El agua saldrá fría en un principioInformación Sobre LA Garantía Años de garantíaMantenimiento Y USO Ajuste el termostato7 minutos para que el agua alcance la nueva temperatura Identificación Y Solución DE Problemas En el númeroManuel du propriétaire CE QUE Vous Devriez Savoir Avant DE Commencer ’installation Ce que vous verrez dans le manuel d’instructionsDans CET Emballage Wave-SSPréparation 21⁄421⁄2 13⁄4Installation DU Robinet VIEW/ Wave Modèles chaud et froid seulemenPour un trou dévier/comptoir standard de 11⁄2 po 3.8 cm En aurez besoin plus tard FigureInstallation DU Robinet HC3/GN3 HC3 seulementDommage matériel Ne pincez pas ou Installation DU Robinet H990 Installation DU Robinet H770 Montage DU Réservoir Connexion Finale DE L’EAU HC-View / HC-Wave / GN3 / H990 / H770Renseignements SUR LA Garantie Garantie de 3 ansSoins ET Utilisation La température à l’usine estDiagnostics 800.558.5700

H770, HC3/GN3 specifications

The InSinkErator HC3/GN3, H770 is a remarkable addition to any modern kitchen, emphasizing convenience, efficiency, and style. As part of InSinkErator's renowned line of hot water dispensers, this model is designed to deliver near-boiling water instantly, making kitchen tasks faster and more efficient.

One of the standout features of the HC3/GN3, H770 is its innovative heating technology. The system is equipped with a powerful heating element that brings water to a precise temperature of around 200 degrees Fahrenheit within seconds. This is perfect for a variety of culinary applications, whether you’re preparing tea, instant coffee, or soups. The almost immediate delivery of hot water eliminates the need for traditional kettles, allowing for more countertop space and reducing energy costs.

Another characteristic of this model is its sleek and compact design. The stylish faucet is available in several finishes, ensuring it can seamlessly blend into any kitchen aesthetic. The ergonomic handle enhances usability, providing ease in both filling pots and dispensing water for other cooking needs. The integrated design also minimizes clutter, combining the functionality of multiple appliances into one.

The HC3/GN3, H770 also prioritizes safety in its design. It features a child-resistant safety lock to prevent accidental activation, making it a safe choice for families with young children. Additionally, the tank is insulated to maintain hot water longer while keeping the surface cool to the touch, reducing the risk of burns.

In terms of installation, the InSinkErator HC3/GN3, H770 is relatively easy to set up under the sink, with a compact tank that fits snugly in kitchen cabinets. The user-friendly interface allows for adjustable temperature controls, enabling precise customization based on personal preferences.

Lastly, this model is built with durability in mind. The materials used are resistant to rust and corrosion, ensuring a long lifespan. InSinkErator also provides a warranty on its products, which underlines their commitment to quality and customer satisfaction.

In conclusion, the InSinkErator HC3/GN3, H770 is an essential kitchen accessory for those who value convenience, efficiency, and safety. Whether for everyday cooking needs or special occasions, this hot water dispenser serves to enhance the overall kitchen experience, epitomizing the blend of technology and practicality. With its robust features and thoughtful design, it is the perfect choice for any home.