Care and USE, Factory temperature pre-set

CARE AND USE

Electric Shock Hazard: To prevent electrical shock, disconnect power before servicing unit. Use only a properly grounded and polarized electric outlet.

ADJUSTING THE THERMOSTAT

Factory temperature pre-set	approx. 200°
is 200˚F. To reset the
thermostat to 200°, turn
the indicator two notches
to the right of vertical.

■Adjust the thermostat slowly, turning the dial clockwise to increase temperature or counter clockwise to decrease temperature, then activate faucet handle for 20 seconds to bring in fresh water to be heated at the new setting. Allow 5-7 minutes for water to reach new temperature.

Scalding Hazard: Do not allow water to boil. May result in severe burns.

SEASONAL STORAGE/DRAINAGE

Anytime the instant hot water dispenser is not used for extended periods of time, unplug and drain unit. If it is below freezing you will need to unplug the unit and drain it.

■Disconnect power from unit.

■Push hot water dispenser faucet lever and allow water to flow until it is cool.

■Shut the cold water supply off at the valve.

■Locate and remove drain screw from bottom center of water tank and drain the water into empty pail.

■Empty the tank and then reinstall drain screw into the bottom of tank, turning until snug. Do NOT over tighten.

■If filter system installed, remove and discard filter cartridge.

■To put back into working order, install new filter cartridge (if required), fill tank with water and reconnect the electrical cord. (Refer to Page 11, Step 6)

PROPERTY DAMAGE

■Regularly inspect the unit for any signs of leakage. If there are signs of water damage, immediately remove the unit from service.

■To avoid water damage from leakage, replace all cut, loose or split tubing.

■A drain pan, plumbed to an appropriate drain or outfitted with a leak detector, should be used in those applications where any leakage could cause property damage.

CLEANING THE FAUCET AND TANK

■Only use mild cleaners to clean the faucet and plastic components.

■Cleaners with acids, abrasives, alkaline or organic solvents will result in deterioration of the plastic components and void the warranty.

For fresher tasting water, add filtration to your instant hot water dispenser system. InSinkErator offers the only water filtration system designed specifically for instant hot water dispensers. For more information, visit www.insinkerator.com.

H770, HC3/GN3 specifications

The InSinkErator HC3/GN3, H770 is a remarkable addition to any modern kitchen, emphasizing convenience, efficiency, and style. As part of InSinkErator's renowned line of hot water dispensers, this model is designed to deliver near-boiling water instantly, making kitchen tasks faster and more efficient.

One of the standout features of the HC3/GN3, H770 is its innovative heating technology. The system is equipped with a powerful heating element that brings water to a precise temperature of around 200 degrees Fahrenheit within seconds. This is perfect for a variety of culinary applications, whether you’re preparing tea, instant coffee, or soups. The almost immediate delivery of hot water eliminates the need for traditional kettles, allowing for more countertop space and reducing energy costs.

Another characteristic of this model is its sleek and compact design. The stylish faucet is available in several finishes, ensuring it can seamlessly blend into any kitchen aesthetic. The ergonomic handle enhances usability, providing ease in both filling pots and dispensing water for other cooking needs. The integrated design also minimizes clutter, combining the functionality of multiple appliances into one.

The HC3/GN3, H770 also prioritizes safety in its design. It features a child-resistant safety lock to prevent accidental activation, making it a safe choice for families with young children. Additionally, the tank is insulated to maintain hot water longer while keeping the surface cool to the touch, reducing the risk of burns.

In terms of installation, the InSinkErator HC3/GN3, H770 is relatively easy to set up under the sink, with a compact tank that fits snugly in kitchen cabinets. The user-friendly interface allows for adjustable temperature controls, enabling precise customization based on personal preferences.

Lastly, this model is built with durability in mind. The materials used are resistant to rust and corrosion, ensuring a long lifespan. InSinkErator also provides a warranty on its products, which underlines their commitment to quality and customer satisfaction.

In conclusion, the InSinkErator HC3/GN3, H770 is an essential kitchen accessory for those who value convenience, efficiency, and safety. Whether for everyday cooking needs or special occasions, this hot water dispenser serves to enhance the overall kitchen experience, epitomizing the blend of technology and practicality. With its robust features and thoughtful design, it is the perfect choice for any home.