Installation Instructions | Section 2 |
|
|
Location of Ice Machine
The location selected for the ice machine must meet the following criteria. If any of these criteria are not met, select another location.
•The location must be free of airborne and other contaminants.
•The air temperature must be at least 35°F (1.6°C), but must not exceed 110°F (43.4°C).
•The location must not be near
•The location must not obstruct air flow through or around the ice machine. Refer to the chart below for clearance requirements.
S1800M |
|
Top/Sides | 8" (20.3 cm) |
Back | 5" (12.7 cm) |
*There is no minimum clearance required for
!Caution
The ice machine must be protected if it will be subjected to temperatures below 32°F (0°C). Failure caused by exposure to freezing temperatures is not covered by the warranty. See “Removal from Service/Winterization”.
Ice Machine Heat of Rejection
Series | Heat of Rejection | |
Ice Machine | Air Conditioning | Peak |
S1800M | 24000 | 36000 |
B.T.U./Hour
Because the heat of rejection varies during the ice making cycle, the figure shown is an average.
Ice machines, like other refrigeration equipment, reject heat through the condenser. It is helpful to know the amount of heat rejected by the ice machine when sizing air conditioning equipment where
This information is also necessary when evaluating the benefits of using
Knowing the amount of heat rejected is also important when sizing a cooling tower for a
Part Number |