Ice-O-Matic ICE250 through ICE2100 SERIES ICE Machine Model Number Remote Condenser Model Number

Page 10

ICE Series

Remote Condenser Guidelines

The ICE0500R3, ICE0606R3, ICE806R3, ICE1006R3, ICE1606HR3 and ICE1506R2 Remote ice makers incorporate the mixing valve in the condenser. This configuration allows up to a 100 foot calculated remote line set run. Reference the diagram below to calculate the maximum 100 foot line set run.

ICE Machine Model Number

Remote Condenser Model Number

ICE1606HR3

LRC2661

 

ICE1506HR2

LRC2661

ICE1006R3

VRC2061

ICE806R3

VRC2061

ICE0606R3

VRC1061

ICE0500R3

VRC1001

Limitations for new remote machines that have the headmaster mounted in the condenser.

Maximum Rise is 35 feet.

Maximum Drop is 15 feet.

Maximum equivalent run is 100 feet.

Formula for figuring maximum equivalent run is as follows:

Rise x 1.7 + Drop x 6.6 + horizontal run = equivalent run.

Examples: 35 ft. rise x 1.7 + 40 ft. horizontal = 99.5 equivalent feet line run

35 ft. rise

40 ft. horizontal

Verify the ICE machine is compatible with the remote condenser. Some ice machines and some remote condensers may or may not have a Mixing Valve (Head Master). Only one valve is required per system. Kits are available to modify the ice machine or condenser for compatibility. For more information contact your ICE-O-Matic Distributor.

34 ft. horizontal

10 ft. drop

10 ft. drop x 6.6 + 34 ft horizontal = 100 equivalent feet line run

Page 5

Page 9 Page 11
Image 10
Page 9 Page 11
Contents ICE Series Cubers ICE Series Forward How To Use This ManualKeep this manual for future reference Table of Contents ICE SeriesVisible Loss or Damage Freight Claims Important Inspect PromptlyConcealed Loss or Damage Parts and Labor ICE Series WarrantyLimitation of Implied Warranty Filing a ClaimModel and Serial Number Format ICE 040 0 H aInstallation Guidelines ICE Series Remote Condenser Installation Air FlowFormula for figuring maximum equivalent run is as follows ICE Machine Model Number Remote Condenser Model NumberElectrical and Plumbing Requirements ICEU150, 220, 225 Electrical and Plumbing Requirements ICEU300 ICE Series Electrical and Plumbing Requirements ICE0806 and ICE1006 Electrical and Plumbing Requirements 48 Inch Wide Cubers Electrical and Plumbing Requirements 22 Inch Wide Cubers Electrical and Plumbing Requirements ICE1606 Remote Electrical and Plumbing Requirements ICE1506 Remote How the ICE Machine Works Start-Up Procedure Bridge Thickness and Timer AdjustmentBin Control Operation Bin Control AdjustmentAdjustments are not covered under warranty Undercounter ModelsGeneral Maintenance Procedure Ice Machine Cleaning and Sanitizing Instructions Cleaning Activity Cleaning Agent Cleaning stainless steelMethod of Application Winterizing Procedures ICE Series Service History Model NumberSerial NumberDate Installed
Top Page Image Contents