Ice-O-Matic ICE250 through ICE2100 SERIES manual ICE Series Forward, How To Use This Manual

Page 2

ICE Series

Forward

How To Use This Manual

ICE-O-Matic provides this manual as an aid to the service technician in installation and maintenance of the ICE Series (electro-mechanical) cube ice machines. Do not attempt to perform installation, start-up or maintenance unless you have read and fully understand this manual.

If at any time you encounter conditions that are not addressed in this manual, call, E-mail or write the ICE-O-Matic Service Department:

ICE-O-Matic

11100 E. 45th Ave.

Denver, Co. 80239

Attn: Technical Service Department

E-Mail: Tech.service@iceomatic.com

Telephone Numbers

Any Service communication must include:

800-423-3367

All Departments

• Model Number

888-349-4423

Technical Assistance Only (After Hours Only)

• Serial number

 

 

• A detailed explanation of the problem

Keep this manual for future reference.

The ICE Series Service Parts Manuals are available separately.

ICE-O-Matic icemakers and dispensers are not approved for outdoor installation.

WARNING: Always disconnect electrical power and shut off water supply whenever maintenance or repairs are performed on the ice machine and related equipment.

CAUTION: Always wear protective eyewear whenever maintenance or repairs are performed on the ice machine and related equipment

Page i

Page 1 Page 3
Image 2
Page 1 Page 3
Contents ICE Series Cubers Keep this manual for future reference How To Use This ManualICE Series Forward Table of Contents ICE SeriesConcealed Loss or Damage Freight Claims Important Inspect PromptlyVisible Loss or Damage Parts and Labor ICE Series WarrantyLimitation of Implied Warranty Filing a ClaimModel and Serial Number Format ICE 040 0 H aInstallation Guidelines ICE Series Remote Condenser Installation Air FlowFormula for figuring maximum equivalent run is as follows ICE Machine Model Number Remote Condenser Model NumberElectrical and Plumbing Requirements ICEU150, 220, 225 Electrical and Plumbing Requirements ICEU300 ICE Series Electrical and Plumbing Requirements ICE0806 and ICE1006 Electrical and Plumbing Requirements 48 Inch Wide Cubers Electrical and Plumbing Requirements 22 Inch Wide Cubers Electrical and Plumbing Requirements ICE1606 Remote Electrical and Plumbing Requirements ICE1506 Remote How the ICE Machine Works Start-Up Procedure Bridge Thickness and Timer AdjustmentBin Control Operation Bin Control AdjustmentAdjustments are not covered under warranty Undercounter ModelsGeneral Maintenance Procedure Ice Machine Cleaning and Sanitizing Instructions Method of Application Cleaning stainless steelCleaning Activity Cleaning Agent Winterizing Procedures ICE Series Service History Model NumberSerial NumberDate Installed
Top Page Image Contents