Ice-O-Matic ICE250 through ICE2100 SERIES manual Model and Serial Number Format, ICE 040 0 H a

Page 6

ICE Series

Model and Serial Number Format

Model and Serial Number Format

The serial number format and machine specifics are detailed on the data plate.

ICE 040 0 H A 2

Design Level

Condenser Type: A=Air, W=Water, R=Remote

Cube Size: H=Half, F=Full

Voltage: 0=115V, 6=230V/60Hz. 5=240V/50Hz.

Approximate Production in 24 hours @70°FAir/50°FWater

Series: Environmental Cuber (Uses HFC Refrigerant)

This format is 14 characters long and begins with a date code followed by the ICE-O-Matic identifier, and then a sequential number. This is an entirely numerical serial number.

The serial number will look like the example.

0407 1280 010077

010077 is the serial identifier.

1280 is the identifier. (ICE-O-Matic)

0407 is the date code, in YYMM format. (2004 July)

Large data plate will be placed on the back of the unit.

Small data plate will be placed by the service valves.

The date code will change monthly and yearly to reflect the date of manufacture.

Page 1

Image 6
Contents ICE Series Cubers How To Use This Manual ICE Series ForwardKeep this manual for future reference Table of Contents ICE SeriesFreight Claims Important Inspect Promptly Visible Loss or DamageConcealed Loss or Damage Parts and Labor ICE Series WarrantyLimitation of Implied Warranty Filing a ClaimModel and Serial Number Format ICE 040 0 H aInstallation Guidelines ICE Series Remote Condenser Installation Air FlowFormula for figuring maximum equivalent run is as follows ICE Machine Model Number Remote Condenser Model NumberElectrical and Plumbing Requirements ICEU150, 220, 225 Electrical and Plumbing Requirements ICEU300 ICE Series Electrical and Plumbing Requirements ICE0806 and ICE1006 Electrical and Plumbing Requirements 48 Inch Wide Cubers Electrical and Plumbing Requirements 22 Inch Wide Cubers Electrical and Plumbing Requirements ICE1606 Remote Electrical and Plumbing Requirements ICE1506 Remote How the ICE Machine Works Start-Up Procedure Bridge Thickness and Timer AdjustmentBin Control Operation Bin Control AdjustmentAdjustments are not covered under warranty Undercounter ModelsGeneral Maintenance Procedure Ice Machine Cleaning and Sanitizing Instructions Cleaning stainless steel Cleaning Activity Cleaning AgentMethod of Application Winterizing Procedures ICE Series Service History Model NumberSerial NumberDate Installed