Maintenance | Section 4 |
WARNING
Disconnect electric power to the ice machine at the electric switch box before proceeding.
Step 17 Repeat step 6 to remove parts for hand sanitizing.
Step 18 Mix a solution of sanitizer and warm water.
Solution Type | Water | Mixed With |
Sanitizer | 23L. (6 gal) | 120 ml (4 oz) sanitizer |
Step 19 Use 1/2 of the sanitizer/water solution to sanitize all removed components. Use a cloth or sponge to liberally apply the solution to all surfaces of the removed parts or soak the removed parts in the sanitizer/water solution. Do not rinse parts after sanitizing.
Step 20 Use 1/2 of the sanitizer/water solution to sanitize all foodzone surfaces of the ice machine and bin. Use a cloth or sponge to liberally apply the solution. When sanitizing, pay particular attention to the following areas:
•Evaporator plastic parts - including top, bottom and sides
•Bin bottom, sides and top
Do not rinse the sanitized areas.
Step 21 Replace all removed components.
Step 22 Reapply power and water to the ice machine and place the toggle switch in the ICE position.
EXTERIOR CLEANING
Clean the area around the ice machine as often as necessary to maintain cleanliness and efficient operation.
Sponge any dust and dirt off the outside of the ice machine with mild soap and water. Wipe dry with a clean, soft cloth.
Treat all exterior stainless steel surfaces with a commercial grade stainless steel cleaner/polish.
ICE MACHINE INSPECTION
Check all water fittings and lines for leaks. Also, make sure the refrigeration tubing is not rubbing or vibrating against other tubing, panels, etc.
Do not put anything (boxes, etc.) in front of the ice machine. There must be adequate airflow through and around the ice machine to maximize ice production and ensure long component life.