Manitowoc Ice QM30 Series specifications Remove the Overflow Tube, Remove the Water Pump

Page 20

Maintenance

Section 4

B. Remove the Overflow Tube

•To remove the tube, lift it up while using a slight back and forth motion to loosen it from the drain hole.

When installing the tube, be sure it is completely inserted into the drain hole to prevent water leakage during normal operation.

OVERFLOW

TUBE

DRAIN

HOLE

sv1684b

Removing the Overflow Tube C. Remove the Vinyl Hose

•Disconnect the water pump discharge hose from the distribution tube and water pump.

D. Remove the Water Pump

•Disconnect the water pump power cord.

•Disconnect the water hose from the pump outlet.

•Loosen the screws that hold the water pump in place.

•Lift the water pump and bracket assembly up and off the screws.

POWER CORD	SCREWS
OUTLET

WATER PUMP

sv1713

Removing the Water Pump

E. Remove the Water Trough

•Remove the screws holding the water trough to the walls of the cabinet.

4-4

Image 20

Contents Installation Use and Care, Manual QM30 Series Ice MachinesThis manual covers the following model numbers Safety NoticesProcedural Notices Table of Contents This page Intentionally Left Blank Section General Information Section General InformationModel/Serial Number Location Model/Serial Number Location Model NumberGeneral Information Section Owner Warranty Registration CardWarranty Coverage Residential Warranty Coverage WHO is Covered by this Limited WARRANTY?Intentionally Left Blank Legs Section Installation InstructionsSection Installation Instructions Installation Instructions Section Location of Ice MachineIce Machine Heat of Rejection Leveling the Ice MachineElectrical Service VoltageFUSE/CIRCUIT Breaker Electrical RatingThis page Intentionally Left Blank Water Service/Drains Water SupplyDrain Connections Water Supply and Drain Line SIZING/CONNECTIONSTypical Water Supply and Drain Line Sizing and Connections Sv1680bSection Ice Machine Operation SectionIce Machine Operation Sequence of OperationIce Thickness Adjustment Ice Thickness Adjustment DialIce Machine Operation Section Correct Ice Bridge ThicknessSection Maintenance Section MaintenanceInterior Cleaning and Sanitizing Cleaning and Sanitizing ProcedureMaintenance Section Remove the Bin DoorParts Removal Overview Remove the Overflow Tube Removing the Overflow Tube C. Remove the Vinyl HoseRemove the Water Pump Removing the Water Pump Remove the Water TroughAmount of Sanitizer Exterior Cleaning ICE Machine InspectionRemoving the Filter Cleaning the CondenserAir-Cooled Condenser Removal from Service/Winterization Checklist Section Before Calling for ServiceBefore Calling for Service Before Calling for Service Section To Correct Problem Possible CausePage Manitowoc ICE, INC