Before Calling for Service | Section 5 |
| |
|
| To Correct |
|
Problem | Possible Cause |
| |
Ice machine produces | Water level is low. | Be sure the overflow tube is fully |
|
shallow or incomplete cubes, |
| seated to prevent water leakage. |
|
or the ice fill pattern on the |
| See page |
|
evaporator is incomplete. |
|
|
|
| Water inlet valve filter screen is dirty. | Remove the water inlet valve and |
|
|
| clean the filter screen. |
|
|
| See page |
|
| Water filtration is poor. | Replace the filter. |
|
| Hot incoming water. | Connect the ice machine to a cold |
|
|
| water supply. See page |
|
| Ice thickness adjustment dial is not set | Adjust the ice thickness adjustment |
|
| properly. | dial. See page |
|
| Incorrect incoming water pressure. | Water pressure must be |
|
|
| (34.8 - 89.9 psi). |
|
| Ice machine is not level. | Level the ice machine. |
|
|
| See page |
|
Low ice capacity. | Water inlet valve filter screen is dirty. | Remove the water inlet valve and |
|
|
| clean the filter screen. |
|
|
| See page |
|
| Incoming water supply is shut off. | Open the water service valve. |
|
| The air filter is dirty. | Clean the air filter. See page |
|
| The condenser is dirty. | Clean the condenser. See page |
|
| Inadequate airflow at the front of the | Remove items blocking airflow at |
|
| ice machine. | the front of the ice machine. |
|
| Ice thickness adjustment dial is not set | Adjust the ice thickness adjustment |
|
| properly. | dial. See page |
|