Programming the Control

GE Monogram GXSF30H Programming the Control, SET Present Time of DAY, SET Water Hardness Number

Step-by-step installation instructions.

CONTROL SETTINGS REQUIRED upon installation and after an extended power outage.

NOTES:

■WHEN THE TRANSFORMER IS PLUGGED INTO THE ELECTRICAL OUTLET, 12:00 PM (flashing), and PRESENT TIME is displayed. Program the control as instructed below.

■If - - - is flashing, use the UP button to set the correct model code as follows: F30 for GXSF30H. If you pass

by the correct code number, use the DOWN button. Then press the MODE button to accept the correct model.

■A “beep” sounds while pressing buttons for control programming. One beep signals a change in the control display. Repeated beeps mean the control will not accept

a change from the button you have pressed, and you should select another button.

■To program the control, you will use the UP , DOWN and MODE buttons.

■Use the MODE button to select the desired control function.

SET PRESENT TIME OF DAY

1. Press the MODE button until PRESENT TIME appears in the display.

2.Press UP or DOWN button to set.

The UP button advances the time; the

DOWN button moves the time in reverse.

2.If the present time is between noon and midnight, be sure PM shows in the display. If the present time is between midnight and noon, be sure AM shows in the display.

NOTE: Each press of an UP or DOWN button changes the time by one minute. Holding the button changes the time at a rapid rate.

3.When the present time is correct, press MODE to accept.

SET WATER HARDNESS NUMBER

1. Press the MODE button until HARDNESS appears in the display.

2.Press UP or DOWN button to set your water hardness number in the display. DOWN decreases the hardness value. UP increases the hardness value.

NOTE: Each press of a button changes the display by 1, between 1 and 25. Above 25, the display changes 5 at a time (25, 30, 35, etc.). Holding a button in changes the numbers at a rapid rate.

3.When the display shows your water hardness (in grains per gallon), press MODE to accept.

NOTE: If there is clear water iron in your water supply, you will need to increase the hardness setting by 5 for each 1 ppm of clear water iron in your water supply.

You can get the grains per gallon (gpg) hardness of your water supply from a water analysis laboratory. If you are on a municipal supply, call your local water department. Or call Legend Technical Services, an independent laboratory, to request a water hardness test kit at 1.800.826.8553, extension

47.If your report shows hardness in parts per million (ppm) or milligrams per liter (mg/l), simply divide by 17.1 to get the equivalent number of grains per gallon.

SET RECHARGE (STARTING) TIME

1. Press the MODE button until RECHARGE TIME appears in the display.

NOTE: A flashing 2:00 AM (factory default)

should show in the display. This is a good time for recharge

to start (takes about 2 hours) in most households because water is not in use. HARD WATER is bypassed to house faucets during recharge.

If no change is needed, go to step 3. To change the recharge starting time, follow step 2.

2.Press UP or DOWN button to set the desired recharge start time. Be sure to observe the AM or PM as you did when setting the time of day.

NOTE: Each press of a button changes the time by 1 hour. Holding the buttons in changes the time at a rapid rate.

3.Press the MODE button to accept.

GXSF30H specifications

The GE Monogram GXSF30H is a sophisticated and stylish refrigerator that epitomizes luxury and advanced technology in kitchen appliances. Designed with the modern homeowner in mind, this appliance combines elegance with functionality to enhance any kitchen space.

One of the standout features of the GXSF30H is its spacious interior, which boasts an impressive capacity, allowing homeowners to store a significant amount of food and beverages. The adjustable shelves provide versatility, accommodating various items from tall bottles to small containers, making organization a breeze.

The refrigerator's exterior is finished with high-quality stainless steel, giving it a sleek and contemporary look that complements any kitchen decor. It also features a built-in water and ice dispenser, providing easy access to chilled water and crushed or cubed ice at the touch of a button. This convenience is enhanced by the advanced filtration system, which ensures that the water is not only cold but also clean and great-tasting.

The GXSF30H is equipped with a state-of-the-art cooling system that maintains optimal temperatures. Utilizing dual climate control technology, it regulates the refrigerator and freezer temperatures independently, ensuring that perishable items stay fresh longer. Additionally, this model incorporates advanced humidity control features that help keep fruits and vegetables at their peak freshness.

Energy efficiency is another hallmark of the GE Monogram GXSF30H. It is designed with Energy Star certification, signifying that it meets strict energy efficiency guidelines. This not only helps reduce electricity bills but also minimizes environmental impact, making it a responsible choice for eco-conscious consumers.

Furthermore, the GXSF30H integrates smart technology, allowing users to control and monitor their refrigerator remotely via a smartphone app. This innovative feature enables users to adjust settings, receive alerts, and track food inventory, making it an ideal solution for today’s on-the-go lifestyle.

In summary, the GE Monogram GXSF30H refrigerator is a remarkable blend of elegant design, ample storage, cutting-edge technology, and energy efficiency. Its combination of features, such as customizable organization, advanced cooling technology, and smart connectivity, makes it a top choice for anyone looking to elevate their kitchen experience. Whether you're hosting a dinner party or managing a busy family schedule, this refrigerator is designed to meet your needs while exuding sophistication and style.