Preparing
Step for
Design Information
Component Cooking Surfaces
.
Installation
13” | I | II |
t~ Max. |
d
One or
30”
Min.
A ~
●2” Min.
to Front
36”
Edge
A
c Refer to Cabinet~ Section for information on appropriate placement and necessary clearances when planning installation.
“Avoid placing cabinetry directly above cooktops when possible.
-If cabinetry is used above cooking surface:
–Use cabinets no more than 13“ deep.
–Maintain 30” minimum clearance between cooktop and unprotected cabinets directly above cooktop.
–If clearance is less than 30”, protect cabinet bottoms with
-Clearance between cooktop and protected cabinetry must not be less than 24”.
–Working areas adjacent to the cooktop should have 18“ minimum clearance between countertop and cabinet bottom.
●*1” Min. | ●Refer to Cutout |
to Wall | |
●1” Min | Information |
to Wall |
|
●Gas in to side to side orientation requres 2“ min. to rear wall,
●* Gas requires 2“ min. to side wall
. When installed, the following minimum clearance must be maintained:
-2“ from front of cooktop to front edge of countertop.
–1” from back of cooktop to rear wall.
–2“ from back of cooktop to rear wall.
–2“ from side of cooktop to side wall.
40