Assemble
10burners, Step
ctick
ignition
Electric Components:
Push in and turn each knob to high position. Make sure each heating element heats up.
Gas Components:
(Electrical connections should be complete.)
“Plug power cord into outlet.
“Assemble burner as shown.
“Check for proper ignition:
-Push in one control knob and turn 90° to HIGH position.
“First test may require some time, while air is flushed out of the gas line:
-Turn knob to OFF.
– Repeat the procedure for each burner.
?Bumer
< W Grate
I
~TrimRing
1
Dfagram571