h Installation
Installation
Component Cooking Surfaces
If necessary, the blower maybe rotated 90° k either
Step
(continued)
direction, or relocated to opposite side of vent housing.
/
Reorient
blower
“Remove filter from vent housing with Phillips screwdriver.
D/agram 541
o Remove blower side plate (four nuts) with 5/1 6“ nutdriver and set aside.
Diagram S42
. Remove blower (four nuts) with 7/16“ socket wrench from inside vent housing and set aside.
Dfagram543
“Remove blower, rotate to new position and reinstall.
-Replace and tighten four nuts using 7/ 16“ socket wrench inside vent housing.
-Replace blower side plate and secure (four nuts) using 5/1 6“ nutdriver.
“Reposition filter inside throat of vent housing.
!hagram544
54