3M 39600 manual Important Safeguards, Knife Warning Label

Important Safeguards

This safety alert symbol identifies important messages in this manual.

READ AND UNDERSTAND THEM BEFORE INSTALLING OR OPERATING THIS EQUIPMENT.

Important –In the event the following safety labels are damaged or destroyed, they must be replaced to ensure operator safety. A label kit, part number 78-8098-9177-9 is available as a stock item or individual labels can be ordered. See Parts Illustration/List, Section I, pages 66 and 67.

The "Warning – Sharp Knife"label (A), shown in Figure 1-1, is attached to both sides of the upper frame at the location of the cut-off knife on the upper taping head. The "Warning – Sharp Knife"label

(B)shown in Figure 1-1, is attached to the orange cut-off knife guard on both taping heads. The labels warn operators and service personnel of the very sharp knife used to cut the tape at the end of the tape application.

Figure 1-1 – Knife Warning Label

The "Warning – Hazardous Voltage"label, shown in Figure 1-2, is attached to the cover of the electrical control box. The label warns service personnel to unplug the power supply before attempting any service work on the case sealer.

Figure 1-2 – Electrical Warning Label

The "Warning – Moving Belts"labels, shown in Figure 1-3, are attached to both sides of the upper belt guards at the infeed end of the machine. The labels warn operators to keep hands or loose clothing away from this area because of moving belts.

Figure 1-3 – Box Drive Belt Warning Label

3