Before using for the first time
Programming the water softener
To exit the programming mode at any time turn the dishwasher off with the button.
Press the button to turn the dishwasher off.
Press and hold the Start / Stop button and turn the dishwasher on simultaneously using the button. Keep the Start / Stop button pressed for at least four seconds until the "Start / Stop" indicator light comes on.
If it does not come on, start over.
Now press the program button twice.
The lower most program indicator light flashes twice at a short interval and the "Cleaning" indicator light flashes once at a short interval (factory default).
The set value is indicated by the flashing rhythm of the "Cleaning" indicator light (see Table).
°d | gr/gal | Flashing rhythm | ||
|
|
|
| "Cleaning" |
|
|
|
|
|
1 | - 4 | 1 | - 4 | Once short |
|
|
|
|
|
5 | - 7 | 5 | - 7 | 2 short |
|
|
| ||
8 - 11 | 8 - 11 | 3 times short | ||
|
|
|
|
|
12 | - 15 | 12 | - 16 | 4 times short |
|
|
|
|
|
16 | - 20 | 17 | - 21 | 5 times short |
|
|
|
|
|
21 | - 25 | 22 | - 26 | 6 times short |
|
|
|
|
|
26 | - 30 | 27 | - 31 | 7 times short |
|
|
|
|
|
31 | - 36 | 32 | - 38 | 8 times short |
|
|
|
|
|
37 | - 45 | 39 | - 47 | 9 times short |
|
|
|
|
|
46 | - 70 | 48 | - 73 | Once long |
|
|
|
|
|
Use the Start / Stop button to select the flashing rhythm that corresponds to your water hardness.
With each press of the button the value will raise one level. Once the highest value is reached the setting will start again from the beginning.
Example:
Water hardness is 22 °d (23 gr/gal). The "Cleaning" progress indicator light flashes 6 times at a short interval.
Press the button to turn the dishwasher off.
12