Use
Standby
A few minutes after the last key is pressed or at the end of the program the dishwasher will switch into Standby mode to save energy. The display and the indicators are turned off and only the Start/Stop flashes slowly.
To turn the dishwasher back on press any key (except ).
If refill salt and/or rinse aid or a fault are present in the display, the dishwasher will switch into Standby mode.
At the end of a program
The program is complete when a "0" appears in the time display and the "End" indicator lights up.
In the "Express" program, the drying fan will run for a few minutes after the program is completed.
To avoid damage to counter tops rom steam, open the door after the the end of the program either fully or keep it closed until you are removing all the dishes.
Unload the dishwasher.
Dishes tend to break and chip more easily when they are hot.
Allow the dishes to cool until they are comfortable enough to handle before unloading them.
If you open the door fully after switching off, the dishes will cool much faster.
Unloading the lower basket first will prevent water drops from the upper basket and cutlery tray (depending on model) from dropping onto dishes in the lower basket.
Turn the dishwasher off "".
The dishwasher continues to use electricity until turned off with the "" button.
Preparing your appliance for an extended vacation
If you elect to turn off the water to your home for an extended period of time, please note that this may not be enough to reduce the risk of a leak.
To be completely safe, you must turn off the water supply to each individual appliance. This means under the sink for a dishwasher, at the laundry bib for your washer, etc.
30