Miele G4510 manual Interrupting a program, Changing a program

Page 31

Use

Interrupting a program

A program is interrupted as soon as the door is opened.

If the door is closed again, the program will continue from where it was interrupted.

￿Water in the dishwasher is hot. Danger of scalding.

Only open the door if absolutely necessary and exercise extreme caution when doing so. Before closing the door again, leave it ajar for approx. 20 seconds. This will enable the temperature in the wash cabinet to settle. Close the door firmly until it clicks into place.

Changing a program

If the detergent dispenser flap is already open, do not change the program.

If a program has already started and you wish to change it:

￿Press the Start / Stop button for at least one second.

The program is canceled. The "Start / Stop" indicator light flashes.

￿Select and start the desired program.

31

Image 31
Contents Operating Instructions Dishwasher 4510 Contents Important Safety InstructionsContents Correct usage Electrical SafetyInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Disposal of an old machine Caring for the environmentEnergy saving washing Disposal of the packing materialTo open the door Child safety lock Before using for the first timeTo close the door Water softener Example Programming the water softenerFilling the salt container Refill salt message Adding rinse aid Rinse aidRinse aid Flashing Adjusting the dosageRhythm Loading the dishwasher Glassware Items not recommended for dishwashingSilver and aluminum Typical load for 10 place settings Upper basket Adjustable cup rackAdjusting the upper basket Foldable spikes Lower basketRemoving Comfort insertInserting Cutlery tray MieleCare Collection Optional accessoriesDetergent UseAdding detergent Program sequence display Turning onSelecting a program Starting a programProgram Guide Program When to use Program sequence GuideAt the end of a program StandbyPreparing your appliance for an extended vacation Changing a program Interrupting a programAdditional options Factory defaultTechnical faults Frequently asked questionsIntake / Drain Indicator flashes Problems water Intake / DrainProblem Possible fault Solution Intake / Drain Indicator flashesGeneral problems with the dishwasher Sounds Glasses Poor cleaning resultsProblem Possible fault Solution Dishes are not CleanWhite residue is Problem Possible fault Solution Dishes are not dryCutlery are SpottedDiscolored film Problem Possible fault Solution Glasses have aBrown or blue Discoloration film Cannot be wiped off Glasses are dullMieleCare After sales servicePC Update RepairsUser Maintenance Instructions Door and the door seal Cleaning and CareExterior Wash cabinetTriple filter system Cleaning and Care Removing the spray arms Cleaning the spray armsInstalling an in-line water filter Cleaning the water inlet filterCleaning the filter Cleaning the drain pump and non-return valve Page Installation Instructions Grounding Instructions Electrical connectionPlumbing Plumbing Venting the drainage system DrainageNoise measurement Installation requirements for measuring noiseGeneral requirements for measuring noise Noise measurement Alteration rights reserved Nr 510 261 G4510