Miele G4510 manual Cleaning the drain pump and non-return valve

Page 47

Cleaning and Care

Cleaning the drain pump and non-return valve

If the dishwasher is not completely drained at the end of a program, the drain pump or non-return valve may be blocked.

￿Turn off the dishwasher and pull the plug.

￿Remove the triple filter (see "Triple filter system").

￿Use a cup or bowl to scoop water out of the wash cabinet.

￿Tilt the locking clamp to the side ￿.

￿Pull out the non-return valve ￿ and rinse it under running water.

￿Remove all foreign objects from the non-return valve.

The drain pump is beneath the non-return valve (see arrow).

￿Remove all foreign objects from the drain pump (glass or bone splinters).

￿Before returning the non-return valve, check that the drain pump is not blocked. Spin the propeller several times in both directions to check for obstructions.

￿Carefully reinsert the non-return valve and secure it with the locking clamp.

￿Make sure the locking clamp clicks into place!

47

Image 47
Contents Operating Instructions Dishwasher 4510 Contents Important Safety InstructionsContents Correct usage Electrical SafetyInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Disposal of an old machine Caring for the environmentEnergy saving washing Disposal of the packing materialTo close the door Before using for the first timeTo open the door Child safety lock Water softener Example Programming the water softenerFilling the salt container Refill salt message Adding rinse aid Rinse aidRhythm Adjusting the dosageRinse aid Flashing Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings Upper basket Adjustable cup rackAdjusting the upper basket Foldable spikes Lower basketInserting Comfort insertRemoving Cutlery tray MieleCare Collection Optional accessoriesDetergent UseAdding detergent Program sequence display Turning onSelecting a program Starting a programProgram Guide Program When to use Program sequence GuidePreparing your appliance for an extended vacation StandbyAt the end of a program Changing a program Interrupting a programAdditional options Factory defaultTechnical faults Frequently asked questionsIntake / Drain Indicator flashes Problems water Intake / DrainProblem Possible fault Solution Intake / Drain Indicator flashesGeneral problems with the dishwasher Sounds Glasses Poor cleaning resultsProblem Possible fault Solution Dishes are not CleanWhite residue is Problem Possible fault Solution Dishes are not dryCutlery are SpottedDiscolored film Problem Possible fault Solution Glasses have aBrown or blue Discoloration film Cannot be wiped off Glasses are dullMieleCare After sales servicePC Update RepairsUser Maintenance Instructions Door and the door seal Cleaning and CareExterior Wash cabinetTriple filter system Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Page Installation Instructions Grounding Instructions Electrical connectionPlumbing Plumbing Venting the drainage system DrainageGeneral requirements for measuring noise Installation requirements for measuring noiseNoise measurement Noise measurement Alteration rights reserved Nr 510 261 G4510