Miele G4510 manual General problems with the dishwasher

Page 35

Frequently asked questions

General problems with the dishwasher

Problem	Possible fault	Solution
The indicators and the	The dishwasher has	Press the button to exit
display is dark. Only	gone into "Standby"	Standby mode.
the "Start/Stop"	mode to save energy.
indicator flashes
slowly.
Detergent is left in the	The dispenser was damp	Dry the dispenser before
dispenser at the end of	when detergent was	adding detergent.
a program.	added.
The detergent lid	Detergent residue is	Remove the residue.
cannot be closed	blocking the catch.
properly.
The door and the	This is not a fault!	The moisture will evaporate
interior walls are still	It is the normal operating	after a short time.
wet after a program has	mode of the drying
finished.	system.
Water remains in the		Before fixing the fault:
wash cabinet at the end		– Press the button to
of a program.		turn the dishwasher off.
	The triple filter in the	Clean the triple filter. See
	wash cabinet is clogged.	"Cleaning and care".
	The drain pump or the	Clean the drain pump and
	non-return valve may be	the non-return valve, see
	blocked.	"Cleaning and care".
	The drain hose is kinked.	Remove any kinks from the
		drain hose.

35

Image 35

Contents Operating Instructions Dishwasher 4510 Contents Important Safety InstructionsContents Correct usage Electrical SafetyInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Disposal of an old machine Caring for the environmentEnergy saving washing Disposal of the packing materialTo close the door Before using for the first timeTo open the door Child safety lock Water softener Example Programming the water softenerFilling the salt container Refill salt message Adding rinse aid Rinse aidRhythm Adjusting the dosageRinse aid Flashing Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings Upper basket Adjustable cup rackAdjusting the upper basket Foldable spikes Lower basketInserting Comfort insertRemoving Cutlery tray MieleCare Collection Optional accessoriesDetergent UseAdding detergent Program sequence display Turning onSelecting a program Starting a programProgram Guide Program When to use Program sequence GuidePreparing your appliance for an extended vacation StandbyAt the end of a program Changing a program Interrupting a programAdditional options Factory defaultTechnical faults Frequently asked questionsIntake / Drain Indicator flashes Problems water Intake / DrainProblem Possible fault Solution Intake / Drain Indicator flashesGeneral problems with the dishwasher Sounds Glasses Poor cleaning resultsProblem Possible fault Solution Dishes are not CleanWhite residue is Problem Possible fault Solution Dishes are not dryCutlery are SpottedDiscolored film Problem Possible fault Solution Glasses have aBrown or blue Discoloration film Cannot be wiped off Glasses are dullMieleCare After sales servicePC Update RepairsUser Maintenance Instructions Door and the door seal Cleaning and CareExterior Wash cabinetTriple filter system Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Page Installation Instructions Grounding Instructions Electrical connectionPlumbing Plumbing Venting the drainage system DrainageGeneral requirements for measuring noise Installation requirements for measuring noiseNoise measurement Noise measurement Alteration rights reserved Nr 510 261 G4510